Call 08048407375 92% Response Rate

Send Email

Freon and Refrigerants Gas Detector

The μGard®2 Sensor MC2 is used for the detection of refrigerants and Freon gases when a typical 4–20 mA (or 2–10 V) signal is required.

Exchangeable sensor unit including digital value processing and self-control for the continu-ous monitoring of the ambient air.

The sensor unit MC2 houses a module with μController, analog output and power supply in addition to the semicon-ductor sensor element including amplifier. The μController calculates a linear 4–20 mA (or 2–10 V) signal out of the measurement signal and also stores all relevant measured values and data of the sensor element.

Calibration is done either by simply replacing the sensor unit or by using the comfortable, integrated calibration routine directly at the system.
Refrigerant R32 Gas Sensor Transmitter
  • Refrigerant R32 Gas Sensor Transmitter
  • Refrigerant R32 Gas Sensor Transmitter
  • Refrigerant R32 Gas Sensor Transmitter
  • Refrigerant R32 Gas Sensor Transmitter

Refrigerant R32 Gas Sensor Transmitter

Product Price: Rs 50,000 / UnitGet Best Price

Product Brochure

Product Details:
Gas TypeRefrigerant
Sensor TypeSemiconductor
Model Name/NumberR32
BrandMSR Germany
Voltage24 VDC
Frequency20-2000 ppm
Display TypeAnalog
Output Signal4-20mA
MaterialPolycarbonate

μGard®2 (developed by MSR) is the new exchangeable sensor unit that is capable of digital value processing, temperature compensation, and self-control for the continuous monitoring of the ambient air to detect R32 refrigerant gas.

The MC2-X-S2080-02-A -X-X is a sensor element at its core with many possible customizations. The beauty of the microgard 2 system is a microcontroller integrated into the Semi-Conductor R32 sensor module. The integrated temperature compensation ensures the highest accuracy, selectivity and reliability despite the long calibration interval. The microcontroller calculates a linear 4-20 mA (or 2-10V) signal out of the measurement signal of the Semi-Conductor sensor and also stores all relevant measured values and data of the sensor element.

Calibration is a breeze with this modular design allowing easy swapping of the sensor unit or via the use of the integrated calibration routine directly at the system.

FEATURES

  • Digital measurement value processing incl. temperature compensation
  • Data / Measured values stored in the microcontroller on the sensor unit allowing easy swap of an old sensor with a newly calibrated sensor.
  • High accuracy, selectivity, and reliability
  • Low zero point drift
  • Sensor lifetime: > 5 years / normal environment
  • SIL2 Compliant development process
  • Easy maintenance and calibration by the exchange of the sensor module or by integrated on-site calibration.
  • 4-20 mA (or 2-10V) analog output with selectable signal output for special mode, fault, etc.
  • Reverse polarity protected, overload and short-circuit proof
  • Integrated heating down to -35°C
  • Plug and play type concept for field calibration, laboratory calibration and site calibration (where the housing of the gas sensor remains on to the wall with cable wiring and later sensor cell transmitter cartridge can be plugin after calibration)
  • Smart digital type calibration facility with an indication of the life of the sensor cell.
  • Simplified maintenance via the exchange of pre-calibrated sensor cartridges or easy on site-calibration.
  • Tough, rugged, glass-fibre reinforced, Impact resistant, fully gasketed
    Polycarbonate IP 65 enclosure.
  • IP65 protected housing, with the provision of dust and moisture protection with
    Hydrophobic filter arrangement.
  • Monitoring of R32 can be achieved with our optional MSR centralized Gas control and monitoring system to meet the global ventilation standards like:

o EN 378
o EN 14624
o EN 45544-1
o EN 61508-1-3
o EN 61010-1
o ANSI/UL 61010 1
o CAN/CSA-C22.2 No. 61010-1

  • Optional:
    • Without housing
    • With housing Plastic: Type D, 94 x 65 x 57 mm
    • 4-20 mA output signal
    • 2-10 V output signal
    • With display for values and operation, 2x open collector for horn and warning lamp

Built for standard output of 4-20 mA / 2-10V analog signal output, this transmitter is compatible with the PolyGard 2 series controllers & Sensor Boards as well as any other electronic control or automation system.

Should you have any questions or concerns regarding this matter, please feel free to contact us or reach our experts to info



Additional Information:

  • Item Code: R32
  • Production Capacity: 1000
  • Delivery Time: 4-6 weeks
Get Best Quote Request Callback
Refrigerant R22 Gas Sensor Transmitter
  • Refrigerant R22 Gas Sensor Transmitter
  • Refrigerant R22 Gas Sensor Transmitter
  • Refrigerant R22 Gas Sensor Transmitter
  • Refrigerant R22 Gas Sensor Transmitter
  • Refrigerant R22 Gas Sensor Transmitter

Refrigerant R22 Gas Sensor Transmitter

Product Price: Rs 45,000 / UnitGet Best Price

Minimum Order Quantity: 1 Unit

Product Brochure

Product Details:
Gas TypeRefrigerant Gas Detector
Sensor TypeSemiconductor
BrandMSR Germany
Model Name/NumberR22
Voltage24 VDC
Frequency20-2000ppm
Display TypeAnalog
Output Signal4-20mA
MaterialGrey Polycarbonate

μGard®2 R22 Freon and Refrigerants Gas Transmitter MC2-X-S2070-01-A-X-X GasAlarm

μGard®2 (developed by MSR) is the new exchangeable sensor unit that is capable of digital value processing, temperature compensation, and self-control for the continuous monitoring of the ambient air to detect R22 refrigerant gas.

The MC2-X-S2070-01-A-X-X is a sensor element at its core with many possible customizations. The beauty of the microgard 2 system is a microcontroller integrated into the Semi-Conductor R22 sensor module. The integrated temperature compensation ensures the highest accuracy, selectivity and reliability despite the long calibration interval. The microcontroller calculates a linear 4-20 mA (or 2-10V) signal out of the measurement signal of the Semi-Conductor sensor and also stores all relevant measured values and data of the sensor element.

Calibration is a breeze with this modular design allowing easy swapping of the sensor unit or via the use of the integrated calibration routine directly at the system.

FEATURES

  • Digital measurement value processing incl. temperature compensation
  • Data / Measured values stored in the microcontroller on the sensor unit allowing easy swap of an old sensor with a newly calibrated sensor.
  • High accuracy, selectivity, and reliability
  • Low zero point drift
  • Sensor lifetime: > 5 years / normal environment
  • SIL2 Compliant development process
  • Easy maintenance and calibration by the exchange of the sensor module or by integrated on-site calibration.
  • 4-20 mA (or 2-10V) analog output with selectable signal output for special mode, fault, etc.
  • Reverse polarity protected, overload and short-circuit proof
  • Integrated heating down to -35°C
  • Plug and play type concept for field calibration, laboratory calibration and site calibration (where the housing of the gas sensor remains on to the wall with cable wiring and later sensor cell transmitter cartridge can be plugin after calibration)
  • Smart digital type calibration facility with an indication of the life of the sensor cell.
  • Simplified maintenance via the exchange of pre-calibrated sensor cartridges or easy on site-calibration.
  • Tough, rugged, glass-fibre reinforced, Impact resistant, fully gasketed
    Polycarbonate IP 65 enclosure.
  • IP65 protected housing, with the provision of dust and moisture protection with
    Hydrophobic filter arrangement.
  • Monitoring of R22 can be achieved with our optional MSR centralized Gas control and monitoring system to meet the global ventilation standards like:

o EN 378
o EN 14624
o EN 45544-1
o EN 61508-1-3
o EN 61010-1
o ANSI/UL 61010 1
o CAN/CSA-C22.2 No. 61010-1

  • Optional:
    • Without housing
    • With housing Plastic: Type D, 94 x 65 x 57 mm
    • 4-20 mA output signal
    • 2-10 V output signal
    • With display for values and operation, 2x open collector for horn and warning lamp

Built for standard output of 4-20 mA / 2-10V analog signal output, this transmitter is compatible with the PolyGard 2 series controllers & Sensor Boards as well as any other electronic control or automation system.

Should you have any questions or concerns regarding this matter, please feel free to contact us or reach our experts to info



Additional Information:

  • Production Capacity: 1000
  • Delivery Time: 2-8 weeks
Get Best Quote Request Callback
Refrigerant  R134a Gas Sensor Transmitter
  • Refrigerant  R134a Gas Sensor Transmitter
  • Refrigerant  R134a Gas Sensor Transmitter

Refrigerant R134a Gas Sensor Transmitter

Product Price: Rs 50,000 / UnitGet Best Price

Product Brochure

Product Details:
Operating Temperature-20-50
Sensor Typesemiconductor
Operating Humidity95%
Expected Operating Life3-5 years
BrandMSR Germany
Measuring Range20-2000 ppm
Response Time30 second

μGard®2 R134a Freon and Refrigerants Gas Transmitter MC2-X-S2077-01-A-X-X GasAlarm

μGard®2 (developed by MSR) is the new exchangeable sensor unit that is capable of digital value processing, temperature compensation, and self-control for the continuous monitoring of the ambient air to detect R134a refrigerant gas.

The MC2-X-S2077-01-Aa-X-X is a sensor element at its core with many possible customizations. The beauty of the microgard 2 system is a microcontroller integrated into the Semi-Conductor R134a sensor module. The integrated temperature compensation ensures the highest accuracy, selectivity and reliability despite the long calibration interval. The microcontroller calculates a linear 4-20 mA (or 2-10V) signal out of the measurement signal of the Semi-Conductor sensor and also stores all relevant measured values and data of the sensor element.

Calibration is a breeze with this modular design allowing easy swapping of the sensor unit or via the use of the integrated calibration routine directly at the system.

FEATURES

  • Digital measurement value processing incl. temperature compensation
  • Data / Measured values stored in the microcontroller on the sensor unit allowing easy swap of an old sensor with a newly calibrated sensor.
  • High accuracy, selectivity, and reliability
  • Low zero point drift
  • Sensor lifetime: > 5 years / normal environment
  • SIL2 Compliant development process
  • Easy maintenance and calibration by the exchange of the sensor module or by integrated on-site calibration.
  • 4-20 mA (or 2-10V) analog output with selectable signal output for special mode, fault, etc.
  • Reverse polarity protected, overload and short-circuit proof
  • Integrated heating down to -35°C
  • Plug and play type concept for field calibration, laboratory calibration and site calibration (where the housing of the gas sensor remains on to the wall with cable wiring and later sensor cell transmitter cartridge can be plugin after calibration)
  • Smart digital type calibration facility with an indication of the life of the sensor cell.
  • Simplified maintenance via the exchange of pre-calibrated sensor cartridges or easy on site-calibration.
  • Tough, rugged, glass-fibre reinforced, Impact resistant, fully gasketed
    Polycarbonate IP 65 enclosure.
  • IP65 protected housing, with the provision of dust and moisture protection with
    Hydrophobic filter arrangement.
  • Monitoring of R134a can be achieved with our optional MSR centralized Gas control and monitoring system to meet the global ventilation standards like:

o EN 378
o EN 14624
o EN 45544-1
o EN 61508-1-3
o EN 61010-1
o ANSI/UL 61010 1
o CAN/CSA-C22.2 No. 61010-1

  • Optional:
    • Without housing
    • With housing Plastic: Type D, 94 x 65 x 57 mm
    • 4-20 mA output signal
    • 2-10 V output signal
    • With display for values and operation, 2x open collector for horn and warning lamp

Built for standard output of 4-20 mA / 2-10V analog signal output, this transmitter is compatible with the PolyGard 2 series controllers & Sensor Boards as well as any other electronic control or automation system.

Should you have any questions or concerns regarding this matter, please feel free to contact us or reach our experts to info



Additional Information:

  • Production Capacity: 1000
  • Delivery Time: 2-8 weeks
Get Best Quote Request Callback
Refrigerant R401a Gas Sensor Transmitter
  • Refrigerant R401a Gas Sensor Transmitter
  • Refrigerant R401a Gas Sensor Transmitter
  • Refrigerant R401a Gas Sensor Transmitter
  • Refrigerant R401a Gas Sensor Transmitter

Refrigerant R401a Gas Sensor Transmitter

Product Price: Rs 50,000 / UnitGet Best Price

Minimum Order Quantity: 1 Unit

Product Brochure

Product Details:
Sensor Typesemiconductor
BrandMSR Germany
Frequency20-2000ppm
Output Signal4-20mA
MaterialPolycarbonate
Accuracy1%
Usage/ApplicationRefrigerant Gas Detection
ColorGrey
Compensated Temperature Range-20-50 degree Celsius

μGard®2 R401a Freon and Refrigerants Gas Transmitter MC2-X-S2070-02-A-X-X GasAlarm

μGard®2 (developed by MSR) is the new exchangeable sensor unit that is capable of digital value processing, temperature compensation, and self-control for the continuous monitoring of the ambient air to detect R401a refrigerant gas.

The MC2-X-S2070-02-A-X-X is a sensor element at its core with many possible customizations. The beauty of the microgard 2 system is a microcontroller integrated into the Semi-Conductor R401a sensor module. The integrated temperature compensation ensures the highest accuracy, selectivity and reliability despite the long calibration interval. The microcontroller calculates a linear 4-20 mA (or 2-10V) signal out of the measurement signal of the Semi-Conductor sensor and also stores all relevant measured values and data of the sensor element.

Calibration is a breeze with this modular design allowing easy swapping of the sensor unit or via the use of the integrated calibration routine directly at the system.

FEATURES

  • Digital measurement value processing incl. temperature compensation
  • Data / Measured values stored in the microcontroller on the sensor unit allowing easy swap of an old sensor with a newly calibrated sensor.
  • High accuracy, selectivity, and reliability
  • Low zero point drift
  • Sensor lifetime: > 5 years / normal environment
  • SIL2 Compliant development process
  • Easy maintenance and calibration by the exchange of the sensor module or by integrated on-site calibration.
  • 4-20 mA (or 2-10V) analog output with selectable signal output for special mode, fault, etc.
  • Reverse polarity protected, overload and short-circuit proof
  • Integrated heating down to -35°C
  • Plug and play type concept for field calibration, laboratory calibration and site calibration (where the housing of the gas sensor remains on to the wall with cable wiring and later sensor cell transmitter cartridge can be plugin after calibration)
  • Smart digital type calibration facility with an indication of the life of the sensor cell.
  • Simplified maintenance via the exchange of pre-calibrated sensor cartridges or easy on site-calibration.
  • Tough, rugged, glass-fibre reinforced, Impact resistant, fully gasketed
    Polycarbonate IP 65 enclosure.
  • IP65 protected housing, with the provision of dust and moisture protection with
    Hydrophobic filter arrangement.
  • Monitoring of R401a can be achieved with our optional MSR centralized Gas control and monitoring system to meet the global ventilation standards like:

o EN 378
o EN 14624
o EN 45544-1
o EN 61508-1-3
o EN 61010-1
o ANSI/UL 61010 1
o CAN/CSA-C22.2 No. 61010-1

  • Optional:
    • Without housing
    • With housing Plastic: Type D, 94 x 65 x 57 mm
    • 4-20 mA output signal
    • 2-10 V output signal
    • With display for values and operation, 2x open collector for horn and warning lamp

Built for standard output of 4-20 mA / 2-10V analog signal output, this transmitter is compatible with the PolyGard 2 series controllers & Sensor Boards as well as any other electronic control or automation system.

Should you have any questions or concerns regarding this matter, please feel free to contact us or reach our experts to info



Additional Information:

  • Production Capacity: 100
Get Best Quote Request Callback
R401b Freon and Refrigerants Gas Sensor Transmitter
  • R401b Freon and Refrigerants Gas Sensor Transmitter
  • R401b Freon and Refrigerants Gas Sensor Transmitter

R401b Freon and Refrigerants Gas Sensor Transmitter

Product Price: Rs 50,000 / PieceGet Best Price

Product Brochure

Product Details:
Operating Temperature-20-50
Operating Humidity95%
Expected Operating Life3-5 years
Measuring Range20-2000 ppm
Response Time30 second
Usage/ApplicationIndustrial
Operating Voltage24vdc

μGard®2 R401b Freon and Refrigerants Gas Transmitter MC2-X-S2070-03-A-X-X GasAlarm

μGard®2 (developed by MSR) is the new exchangeable sensor unit that is capable of digital value processing, temperature compensation, and self-control for the continuous monitoring of the ambient air to detect R401b refrigerant gas.

The MC2-X-S2070-03-A-X-X is a sensor element at its core with many possible customizations. The beauty of the microgard 2 system is a microcontroller integrated into the Semi-Conductor R401b sensor module. The integrated temperature compensation ensures the highest accuracy, selectivity and reliability despite the long calibration interval. The microcontroller calculates a linear 4-20 mA (or 2-10V) signal out of the measurement signal of the Semi-Conductor sensor and also stores all relevant measured values and data of the sensor element.

Calibration is a breeze with this modular design allowing easy swapping of the sensor unit or via the use of the integrated calibration routine directly at the system.

FEATURES

  • Digital measurement value processing incl. temperature compensation
  • Data / Measured values stored in the microcontroller on the sensor unit allowing easy swap of an old sensor with a newly calibrated sensor.
  • High accuracy, selectivity, and reliability
  • Low zero point drift
  • Sensor lifetime: > 5 years / normal environment
  • SIL2 Compliant development process
  • Easy maintenance and calibration by the exchange of the sensor module or by integrated on-site calibration.
  • 4-20 mA (or 2-10V) analog output with selectable signal output for special mode, fault, etc.
  • Reverse polarity protected, overload and short-circuit proof
  • Integrated heating down to -35°C
  • Plug and play type concept for field calibration, laboratory calibration and site calibration (where the housing of the gas sensor remains on to the wall with cable wiring and later sensor cell transmitter cartridge can be plugin after calibration)
  • Smart digital type calibration facility with an indication of the life of the sensor cell.
  • Simplified maintenance via the exchange of pre-calibrated sensor cartridges or easy on site-calibration.
  • Tough, rugged, glass-fibre reinforced, Impact resistant, fully gasketed
    Polycarbonate IP 65 enclosure.
  • IP65 protected housing, with the provision of dust and moisture protection with
    Hydrophobic filter arrangement.
  • Monitoring of R401b can be achieved with our optional MSR centralized Gas control and monitoring system to meet the global ventilation standards like:

o EN 378
o EN 14624
o EN 45544-1
o EN 61508-1-3
o EN 61010-1
o ANSI/UL 61010 1
o CAN/CSA-C22.2 No. 61010-1

  • Optional:
    • Without housing
    • With housing Plastic: Type D, 94 x 65 x 57 mm
    • 4-20 mA output signal
    • 2-10 V output signal
    • With display for values and operation, 2x open collector for horn and warning lamp

Built for standard output of 4-20 mA / 2-10V analog signal output, this transmitter is compatible with the PolyGard 2 series controllers & Sensor Boards as well as any other electronic control or automation system.

Should you have any questions or concerns regarding this matter, please feel free to contact us or reach our experts to info



Additional Information:

  • Production Capacity: 100
  • Delivery Time: 2-8 weeks
Get Best Quote Request Callback
Refrigerant R123 Gas Sensor Transmitter

Refrigerant R123 Gas Sensor Transmitter

Product Price: Rs 1 / UnitGet Best Price

Product Brochure

Product Details:
Gas TypeRefrigerant Gas
Sensor Typesemiconductor
BrandMSR Germany
Model Name/NumberR123
Voltage24vdc
Frequency20-2000ppm
Display TypeDigital
Output Signal4-20mA
MaterialPolycarbonate

μGard®2 R123 Freon and Refrigerants Gas Transmitter MC2-X-S2064-01-A -X-X GasAlarm

μGard®2 (developed by MSR) is the new exchangeable sensor unit that is capable of digital value processing, temperature compensation, and self-control for the continuous monitoring of the ambient air to detect R123 refrigerant gas.

The MC2-X-S2064-01-A -X-X is a sensor element at its core with many possible customizations. The beauty of the microgard 2 system is a microcontroller integrated into the Semi-Conductor R123 sensor module. The integrated temperature compensation ensures the highest accuracy, selectivity and reliability despite the long calibration interval. The microcontroller calculates a linear 4-20 mA (or 2-10V) signal out of the measurement signal of the Semi-Conductor sensor and also stores all relevant measured values and data of the sensor element.

Calibration is a breeze with this modular design allowing easy swapping of the sensor unit or via the use of the integrated calibration routine directly at the system.

FEATURES

  • Digital measurement value processing incl. temperature compensation
  • Data / Measured values stored in the microcontroller on the sensor unit allowing easy swap of an old sensor with a newly calibrated sensor.
  • High accuracy, selectivity, and reliability
  • Low zero point drift
  • Sensor lifetime: > 5 years / normal environment
  • SIL2 Compliant development process
  • Easy maintenance and calibration by the exchange of the sensor module or by integrated on-site calibration.
  • 4-20 mA (or 2-10V) analog output with selectable signal output for special mode, fault, etc.
  • Reverse polarity protected, overload and short-circuit proof
  • Integrated heating down to -35°C
  • Plug and play type concept for field calibration, laboratory calibration and site calibration (where the housing of the gas sensor remains on to the wall with cable wiring and later sensor cell transmitter cartridge can be plugin after calibration)
  • Smart digital type calibration facility with an indication of the life of the sensor cell.
  • Simplified maintenance via the exchange of pre-calibrated sensor cartridges or easy on site-calibration.
  • Tough, rugged, glass-fibre reinforced, Impact resistant, fully gasketed
    Polycarbonate IP 65 enclosure.
  • IP65 protected housing, with the provision of dust and moisture protection with
    Hydrophobic filter arrangement.
  • Monitoring of R123 can be achieved with our optional MSR centralized Gas control and monitoring system to meet the global ventilation standards like:

o EN 378
o EN 14624
o EN 45544-1
o EN 61508-1-3
o EN 61010-1
o ANSI/UL 61010 1
o CAN/CSA-C22.2 No. 61010-1

  • Optional:
    • Without housing
    • With housing Plastic: Type D, 94 x 65 x 57 mm
    • 4-20 mA output signal
    • 2-10 V output signal
    • With display for values and operation, 2x open collector for horn and warning lamp

Built for standard output of 4-20 mA / 2-10V analog signal output, this transmitter is compatible with the PolyGard 2 series controllers & Sensor Boards as well as any other electronic control or automation system.

Should you have any questions or concerns regarding this matter, please feel free to contact us or reach our experts to info



Additional Information:

  • Production Capacity: `1000
  • Delivery Time: 2-8 weeks
Get Best Quote Request Callback
Refrigerant R1234yf Gas Sensor Transmitter
  • Refrigerant R1234yf Gas Sensor Transmitter
  • Refrigerant R1234yf Gas Sensor Transmitter

Refrigerant R1234yf Gas Sensor Transmitter

Product Price: Rs 1 / UnitGet Best Price

Product Brochure

Product Details:
Gas TypeRefrigerant Gas
Sensor Typesemiconductor
Model Name/NumberR1234yf
BrandMSR Germany
Voltage24vdc
Frequency20-2000ppm
Display TypeDigital
Output Signal4-20mA
MaterialPolycarbonate

μGard®2 R1234yf  Freon and Refrigerants Gas Transmitter MC2-X-S2063-01-A-X-X GasAlarm

μGard®2 (developed by MSR) is the new exchangeable sensor unit that is capable of digital value processing, temperature compensation, and self-control for the continuous monitoring of the ambient air to detect R1234yf refrigerant gas.

The MC2-X-S2063-01-A-X-X is a sensor element at its core with many possible customizations. The beauty of the microgard 2 system is a microcontroller integrated into the Semi-Conductor R1234yf sensor module. The integrated temperature compensation ensures the highest accuracy, selectivity and reliability despite the long calibration interval. The microcontroller calculates a linear 4-20 mA (or 2-10V) signal out of the measurement signal of the Semi-Conductor sensor and also stores all relevant measured values and data of the sensor element.

Calibration is a breeze with this modular design allowing easy swapping of the sensor unit or via the use of the integrated calibration routine directly at the system.

FEATURES

  • Digital measurement value processing incl. temperature compensation
  • Data / Measured values stored in the microcontroller on the sensor unit allowing easy swap of an old sensor with a newly calibrated sensor.
  • High accuracy, selectivity, and reliability
  • Low zero point drift
  • Sensor lifetime: > 5 years / normal environment
  • SIL2 Compliant development process
  • Easy maintenance and calibration by the exchange of the sensor module or by integrated on-site calibration.
  • 4-20 mA (or 2-10V) analog output with selectable signal output for special mode, fault, etc.
  • Reverse polarity protected, overload and short-circuit proof
  • Integrated heating down to -35°C
  • Plug and play type concept for field calibration, laboratory calibration and site calibration (where the housing of the gas sensor remains on to the wall with cable wiring and later sensor cell transmitter cartridge can be plugin after calibration)
  • Smart digital type calibration facility with an indication of the life of the sensor cell.
  • Simplified maintenance via the exchange of pre-calibrated sensor cartridges or easy on site-calibration.
  • Tough, rugged, glass-fibre reinforced, Impact resistant, fully gasketed
    Polycarbonate IP 65 enclosure.
  • IP65 protected housing, with the provision of dust and moisture protection with
    Hydrophobic filter arrangement.
  • Monitoring of R1234yf can be achieved with our optional MSR centralized Gas control and monitoring system to meet the global ventilation standards like:

o EN 378
o EN 14624
o EN 45544-1
o EN 61508-1-3
o EN 61010-1
o ANSI/UL 61010 1
o CAN/CSA-C22.2 No. 61010-1

  • Optional:
    • Without housing
    • With housing Plastic: Type D, 94 x 65 x 57 mm
    • 4-20 mA output signal
    • 2-10 V output signal
    • With display for values and operation, 2x open collector for horn and warning lamp

Built for standard output of 4-20 mA / 2-10V analog signal output, this transmitter is compatible with the PolyGard 2 series controllers & Sensor Boards as well as any other electronic control or automation system.

Should you have any questions or concerns regarding this matter, please feel free to contact us or reach our experts to info



Additional Information:

  • Production Capacity: 100
  • Delivery Time: 2-8 week
Get Best Quote Request Callback
Refrigerant R1234ze Gas Sensor Transmitter

Refrigerant R1234ze Gas Sensor Transmitter

Product Price: Rs 1 / UnitGet Best Price

Product Brochure

Product Details:
Gas TypeRefrigerant gas
Sensor Typesemiconductor
BrandMSR Germany
Model Name/NumberR1234ze
Voltage24vdc
Frequency20-2000ppm
Display TypeDigital
Output Signal4-20mA
MaterialPolycarbonate

μGard®2 R1234ze Freon and Refrigerants Gas Transmitter MC2-X-S2063-07-A-X-X GasAlarm

μGard®2 (developed by MSR) is the new exchangeable sensor unit that is capable of digital value processing, temperature compensation, and self-control for the continuous monitoring of the ambient air to detect R1234ze refrigerant gas.

The MC2-X-S2063-07-A-X-X is a sensor element at its core with many possible customizations. The beauty of the microgard 2 system is a microcontroller integrated into the Semi-Conductor R1234ze sensor module. The integrated temperature compensation ensures the highest accuracy, selectivity and reliability despite the long calibration interval. The microcontroller calculates a linear 4-20 mA (or 2-10V) signal out of the measurement signal of the Semi-Conductor sensor and also stores all relevant measured values and data of the sensor element.

Calibration is a breeze with this modular design allowing easy swapping of the sensor unit or via the use of the integrated calibration routine directly at the system.

FEATURES

  • Digital measurement value processing incl. temperature compensation
  • Data / Measured values stored in the microcontroller on the sensor unit allowing easy swap of an old sensor with a newly calibrated sensor.
  • High accuracy, selectivity, and reliability
  • Low zero point drift
  • Sensor lifetime: > 5 years / normal environment
  • SIL2 Compliant development process
  • Easy maintenance and calibration by the exchange of the sensor module or by integrated on-site calibration.
  • 4-20 mA (or 2-10V) analog output with selectable signal output for special mode, fault, etc.
  • Reverse polarity protected, overload and short-circuit proof
  • Integrated heating down to -35°C
  • Plug and play type concept for field calibration, laboratory calibration and site calibration (where the housing of the gas sensor remains on to the wall with cable wiring and later sensor cell transmitter cartridge can be plugin after calibration)
  • Smart digital type calibration facility with an indication of the life of the sensor cell.
  • Simplified maintenance via the exchange of pre-calibrated sensor cartridges or easy on site-calibration.
  • Tough, rugged, glass-fibre reinforced, Impact resistant, fully gasketed
    Polycarbonate IP 65 enclosure.
  • IP65 protected housing, with the provision of dust and moisture protection with
    Hydrophobic filter arrangement.
  • Monitoring of R1234ze can be achieved with our optional MSR centralized Gas control and monitoring system to meet the global ventilation standards like:

o EN 378
o EN 14624
o EN 45544-1
o EN 61508-1-3
o EN 61010-1
o ANSI/UL 61010 1
o CAN/CSA-C22.2 No. 61010-1

  • Optional:
    • Without housing
    • With housing Plastic: Type D, 94 x 65 x 57 mm
    • 4-20 mA output signal
    • 2-10 V output signal
    • With display for values and operation, 2x open collector for horn and warning lamp

Built for standard output of 4-20 mA / 2-10V analog signal output, this transmitter is compatible with the PolyGard 2 series controllers & Sensor Boards as well as any other electronic control or automation system.

Should you have any questions or concerns regarding this matter, please feel free to contact us or reach our experts to info


 



Additional Information:

  • Production Capacity: 100
  • Delivery Time: 2-8 weeks
Get Best Quote Request Callback
Refrigerant R403a Gas Sensor Transmitter
  • Refrigerant R403a Gas Sensor Transmitter
  • Refrigerant R403a Gas Sensor Transmitter
  • Refrigerant R403a Gas Sensor Transmitter
  • Refrigerant R403a Gas Sensor Transmitter
  • Refrigerant R403a Gas Sensor Transmitter
  • Refrigerant R403a Gas Sensor Transmitter

Refrigerant R403a Gas Sensor Transmitter

Product Price: Rs 1 / UnitGet Best Price

Product Brochure

Product Details:
Gas TypeRefrigerant Gas
Sensor Typesemiconductor
BrandMSR Germany
Model Name/NumberR403a
Voltage24vdc
Frequency20-2000ppm
Display TypeDigital
Output Signal4-20mA
MaterialPolycarbonate

uGard2 R403a Freon and Refrigerants Gas Transmitter MC2-X-S2070-06-A-X-X GasAlarm

uGard2 (developed by MSR) is the new exchangeable sensor unit that is capable of digital value processing, temperature compensation, and self-control for the continuous monitoring of the ambient air to detect R403a refrigerant gas.

The MC2-X-S2070-06-A-X-X is a sensor element at its core with many possible customizations. The beauty of the microgard 2 system is a microcontroller integrated into the Semi-Conductor R403a sensor module. The integrated temperature compensation ensures the highest accuracy, selectivity and reliability despite the long calibration interval. The microcontroller calculates a linear 4-20 mA (or 2-10V) signal out of the measurement signal of the Semi-Conductor sensor and also stores all relevant measured values and data of the sensor element.

Calibration is a breeze with this modular design allowing easy swapping of the sensor unit or via the use of the integrated calibration routine directly at the system.

FEATURES

  • Digital measurement value processing incl. temperature compensation
  • Data / Measured values stored in the microcontroller on the sensor unit allowing easy swap of an old sensor with a newly calibrated sensor.
  • High accuracy, selectivity, and reliability
  • Low zero point drift
  • Sensor lifetime: > 5 years / normal environment
  • SIL2 Compliant development process
  • Easy maintenance and calibration by the exchange of the sensor module or by integrated on-site calibration.
  • 4-20 mA (or 2-10V) analog output with selectable signal output for special mode, fault, etc.
  • Reverse polarity protected, overload and short-circuit proof
  • Integrated heating down to -35°C
  • Plug and play type concept for field calibration, laboratory calibration and site calibration (where the housing of the gas sensor remains on to the wall with cable wiring and later sensor cell transmitter cartridge can be plugin after calibration)
  • Smart digital type calibration facility with an indication of the life of the sensor cell.
  • Simplified maintenance via the exchange of pre-calibrated sensor cartridges or easy on site-calibration.
  • Tough, rugged, glass-fibre reinforced, Impact resistant, fully gasketed
    Polycarbonate IP 65 enclosure.
  • IP65 protected housing, with the provision of dust and moisture protection with
    Hydrophobic filter arrangement.
  • Monitoring of R403a can be achieved with our optional MSR centralized Gas control and monitoring system to meet the global ventilation standards like:

o EN 378
o EN 14624
o EN 45544-1
o EN 61508-1-3
o EN 61010-1
o ANSI/UL 61010 1
o CAN/CSA-C22.2 No. 61010-1

  • Optional:
    • Without housing
    • With housing Plastic: Type D, 94 x 65 x 57 mm
    • 4-20 mA output signal
    • 2-10 V output signal
    • With display for values and operation, 2x open collector for horn and warning lamp

Built for standard output of 4-20 mA / 2-10V analog signal output, this transmitter is compatible with the PolyGard 2 series controllers & Sensor Boards as well as any other electronic control or automation system.

Should you have any questions or concerns regarding this matter, please feel free to contact us or reach our experts to 


 



Additional Information:

  • Production Capacity: 100
  • Delivery Time: 2-8 weeks
Get Best Quote Request Callback
Refrigerant R450a Gas Sensor Transmitter
  • Refrigerant R450a Gas Sensor Transmitter
  • Refrigerant R450a Gas Sensor Transmitter
  • Refrigerant R450a Gas Sensor Transmitter
  • Refrigerant R450a Gas Sensor Transmitter

Refrigerant R450a Gas Sensor Transmitter

Product Price: Rs 1 / UnitGet Best Price

Product Brochure

Product Details:
Gas TypeRefrigerant Gas
Sensor Typesemiconductor
Model Name/NumberR450a
BrandMSR Germany
Voltage24vdc
Frequency20-2000ppm
Display TypeDigital
Output Signal4-20mA
MaterialPolycarbonate

μGard®2 R450a Freon and Refrigerants Gas Transmitter MC2-X-S2077-12-A -X-X GasAlarm

μGard®2 (developed by MSR) is the new exchangeable sensor unit that is capable of digital value processing, temperature compensation, and self-control for the continuous monitoring of the ambient air to detect R450a refrigerant gas.

The MC2-X-S2077-12-A -X-X is a sensor element at its core with many possible customizations. The beauty of the microgard 2 system is a microcontroller integrated into the Semi-Conductor R450a sensor module. The integrated temperature compensation ensures the highest accuracy, selectivity and reliability despite the long calibration interval. The microcontroller calculates a linear 4-20 mA (or 2-10V) signal out of the measurement signal of the Semi-Conductor sensor and also stores all relevant measured values and data of the sensor element.

Calibration is a breeze with this modular design allowing easy swapping of the sensor unit or via the use of the integrated calibration routine directly at the system.

FEATURES

  • Digital measurement value processing incl. temperature compensation
  • Data / Measured values stored in the microcontroller on the sensor unit allowing easy swap of an old sensor with a newly calibrated sensor.
  • High accuracy, selectivity, and reliability
  • Low zero point drift
  • Sensor lifetime: > 5 years / normal environment
  • SIL2 Compliant development process
  • Easy maintenance and calibration by the exchange of the sensor module or by integrated on-site calibration.
  • 4-20 mA (or 2-10V) analog output with selectable signal output for special mode, fault, etc.
  • Reverse polarity protected, overload and short-circuit proof
  • Integrated heating down to -35°C
  • Plug and play type concept for field calibration, laboratory calibration and site calibration (where the housing of the gas sensor remains on to the wall with cable wiring and later sensor cell transmitter cartridge can be plugin after calibration)
  • Smart digital type calibration facility with an indication of the life of the sensor cell.
  • Simplified maintenance via the exchange of pre-calibrated sensor cartridges or easy on site-calibration.
  • Tough, rugged, glass-fibre reinforced, Impact resistant, fully gasketed
    Polycarbonate IP 65 enclosure.
  • IP65 protected housing, with the provision of dust and moisture protection with
    Hydrophobic filter arrangement.
  • Monitoring of R450a can be achieved with our optional MSR centralized Gas control and monitoring system to meet the global ventilation standards like:

o EN 378
o EN 14624
o EN 45544-1
o EN 61508-1-3
o EN 61010-1
o ANSI/UL 61010 1
o CAN/CSA-C22.2 No. 61010-1

  • Optional:
    • Without housing
    • With housing Plastic: Type D, 94 x 65 x 57 mm
    • 4-20 mA output signal
    • 2-10 V output signal
    • With display for values and operation, 2x open collector for horn and warning lamp

Built for standard output of 4-20 mA / 2-10V analog signal output, this transmitter is compatible with the PolyGard 2 series controllers & Sensor Boards as well as any other electronic control or automation system.

Should you have any questions or concerns regarding this matter, please feel free to contact us or reach our experts to info



Additional Information:

  • Production Capacity: 100
  • Delivery Time: 2-8 weeks
Get Best Quote Request Callback
Refrigerant  R452b Gas Sensor Transmitter

Refrigerant R452b Gas Sensor Transmitter

Product Price: Rs 1 / UnitGet Best Price

Product Brochure

Product Details:
Gas TypeRefrigerant Gas
Sensor Typesemiconductor
BrandMSR Germany
Model Name/NumberR452b
Voltage24vdc
Display TypeDigital
Output Signal4-20mA
MaterialPolycarbonate

μGard®2 R452b Freon and Refrigerants Gas Transmitter MC2-X-S2080-09-A-X-X GasAlarm

μGard®2 (developed by MSR) is the new exchangeable sensor unit that is capable of digital value processing, temperature compensation, and self-control for the continuous monitoring of the ambient air to detect R452b refrigerant gas.

The MC2-X-S2080-09-A-X-X is a sensor element at its core with many possible customizations. The beauty of the microgard 2 system is a microcontroller integrated into the Semi-Conductor R452b sensor module. The integrated temperature compensation ensures the highest accuracy, selectivity and reliability despite the long calibration interval. The microcontroller calculates a linear 4-20 mA (or 2-10V) signal out of the measurement signal of the Semi-Conductor sensor and also stores all relevant measured values and data of the sensor element.

Calibration is a breeze with this modular design allowing easy swapping of the sensor unit or via the use of the integrated calibration routine directly at the system.

FEATURES

  • Digital measurement value processing incl. temperature compensation
  • Data / Measured values stored in the microcontroller on the sensor unit allowing easy swap of an old sensor with a newly calibrated sensor.
  • High accuracy, selectivity, and reliability
  • Low zero point drift
  • Sensor lifetime: > 5 years / normal environment
  • SIL2 Compliant development process
  • Easy maintenance and calibration by the exchange of the sensor module or by integrated on-site calibration.
  • 4-20 mA (or 2-10V) analog output with selectable signal output for special mode, fault, etc.
  • Reverse polarity protected, overload and short-circuit proof
  • Integrated heating down to -35°C
  • Plug and play type concept for field calibration, laboratory calibration and site calibration (where the housing of the gas sensor remains on to the wall with cable wiring and later sensor cell transmitter cartridge can be plugin after calibration)
  • Smart digital type calibration facility with an indication of the life of the sensor cell.
  • Simplified maintenance via the exchange of pre-calibrated sensor cartridges or easy on site-calibration.
  • Tough, rugged, glass-fibre reinforced, Impact resistant, fully gasketed
    Polycarbonate IP 65 enclosure.
  • IP65 protected housing, with the provision of dust and moisture protection with
    Hydrophobic filter arrangement.
  • Monitoring of R452b can be achieved with our optional MSR centralized Gas control and monitoring system to meet the global ventilation standards like:

o EN 378
o EN 14624
o EN 45544-1
o EN 61508-1-3
o EN 61010-1
o ANSI/UL 61010 1
o CAN/CSA-C22.2 No. 61010-1

  • Optional:
    • Without housing
    • With housing Plastic: Type D, 94 x 65 x 57 mm
    • 4-20 mA output signal
    • 2-10 V output signal
    • With display for values and operation, 2x open collector for horn and warning lamp

Built for standard output of 4-20 mA / 2-10V analog signal output, this transmitter is compatible with the PolyGard 2 series controllers & Sensor Boards as well as any other electronic control or automation system.

 



Additional Information:

  • Production Capacity: 100
  • Delivery Time: 2-8 weeks
Get Best Quote Request Callback
Refrigerant R454b Gas Sensor Transmitter

Refrigerant R454b Gas Sensor Transmitter

Product Price: Rs 1 / UnitGet Best Price

Product Brochure

Product Details:
Gas TypeRefrigerant Gas
Sensor Typesemiconductor
BrandMSR Germany
Model Name/NumberR454b
Voltage24vdc
Display TypeDigital
Output Signal4-20mA
MaterialPolycarbonate

μGard®2 R454b Freon and Refrigerants Gas Transmitter MC2-X-S2063-06-A-X-X GasAlarm

μGard®2 (developed by MSR) is the new exchangeable sensor unit that is capable of digital value processing, temperature compensation, and self-control for the continuous monitoring of the ambient air to detect R454b refrigerant gas.

The MC2-X-S2063-06-A-X-X is a sensor element at its core with many possible customizations. The beauty of the microgard 2 system is a microcontroller integrated into the Semi-Conductor R454b sensor module. The integrated temperature compensation ensures the highest accuracy, selectivity and reliability despite the long calibration interval. The microcontroller calculates a linear 4-20 mA (or 2-10V) signal out of the measurement signal of the Semi-Conductor sensor and also stores all relevant measured values and data of the sensor element.

Calibration is a breeze with this modular design allowing easy swapping of the sensor unit or via the use of the integrated calibration routine directly at the system.

FEATURES

  • Digital measurement value processing incl. temperature compensation
  • Data / Measured values stored in the microcontroller on the sensor unit allowing easy swap of an old sensor with a newly calibrated sensor.
  • High accuracy, selectivity, and reliability
  • Low zero point drift
  • Sensor lifetime: > 5 years / normal environment
  • SIL2 Compliant development process
  • Easy maintenance and calibration by the exchange of the sensor module or by integrated on-site calibration.
  • 4-20 mA (or 2-10V) analog output with selectable signal output for special mode, fault, etc.
  • Reverse polarity protected, overload and short-circuit proof
  • Integrated heating down to -35°C
  • Plug and play type concept for field calibration, laboratory calibration and site calibration (where the housing of the gas sensor remains on to the wall with cable wiring and later sensor cell transmitter cartridge can be plugin after calibration)
  • Smart digital type calibration facility with an indication of the life of the sensor cell.
  • Simplified maintenance via the exchange of pre-calibrated sensor cartridges or easy on site-calibration.
  • Tough, rugged, glass-fibre reinforced, Impact resistant, fully gasketed
    Polycarbonate IP 65 enclosure.
  • IP65 protected housing, with the provision of dust and moisture protection with
    Hydrophobic filter arrangement.
  • Monitoring of R454b can be achieved with our optional MSR centralized Gas control and monitoring system to meet the global ventilation standards like:

o EN 378
o EN 14624
o EN 45544-1
o EN 61508-1-3
o EN 61010-1
o ANSI/UL 61010 1
o CAN/CSA-C22.2 No. 61010-1

  • Optional:
    • Without housing
    • With housing Plastic: Type D, 94 x 65 x 57 mm
    • 4-20 mA output signal
    • 2-10 V output signal
    • With display for values and operation, 2x open collector for horn and warning lamp

Built for standard output of 4-20 mA / 2-10V analog signal output, this transmitter is compatible with the PolyGard 2 series controllers & Sensor Boards as well as any other electronic control or automation system.

 



Additional Information:

  • Production Capacity: 100
  • Delivery Time: 2-8 weeks
Get Best Quote Request Callback
Refrigerant R454c Gas Sensor Transmitter

Refrigerant R454c Gas Sensor Transmitter

Product Price: Rs 1 / UnitGet Best Price

Product Brochure

Product Details:
Gas TypeRefrigerant Gas
Sensor Typesemiconductor
Model Name/NumberR454C
BrandMSR Germany
Voltage24vdc
Frequency20-2000ppm
Display TypeDigital
Output Signal4-20mA
MaterialPolycarbonate

μGard®2 R454c Freon and Refrigerants Gas Transmitter MC2-X-S2063-04-A-X-X GasAlarm

μGard®2 (developed by MSR) is the new exchangeable sensor unit that is capable of digital value processing, temperature compensation, and self-control for the continuous monitoring of the ambient air to detect R454c refrigerant gas.

The MC2-X-S2063-04-A-X-X is a sensor element at its core with many possible customizations. The beauty of the microgard 2 system is a microcontroller integrated into the Semi-Conductor R454c sensor module. The integrated temperature compensation ensures the highest accuracy, selectivity and reliability despite the long calibration interval. The microcontroller calculates a linear 4-20 mA (or 2-10V) signal out of the measurement signal of the Semi-Conductor sensor and also stores all relevant measured values and data of the sensor element.

Calibration is a breeze with this modular design allowing easy swapping of the sensor unit or via the use of the integrated calibration routine directly at the system.

FEATURES

  • Digital measurement value processing incl. temperature compensation
  • Data / Measured values stored in the microcontroller on the sensor unit allowing easy swap of an old sensor with a newly calibrated sensor.
  • High accuracy, selectivity, and reliability
  • Low zero point drift
  • Sensor lifetime: > 5 years / normal environment
  • SIL2 Compliant development process
  • Easy maintenance and calibration by the exchange of the sensor module or by integrated on-site calibration.
  • 4-20 mA (or 2-10V) analog output with selectable signal output for special mode, fault, etc.
  • Reverse polarity protected, overload and short-circuit proof
  • Integrated heating down to -35°C
  • Plug and play type concept for field calibration, laboratory calibration and site calibration (where the housing of the gas sensor remains on to the wall with cable wiring and later sensor cell transmitter cartridge can be plugin after calibration)
  • Smart digital type calibration facility with an indication of the life of the sensor cell.
  • Simplified maintenance via the exchange of pre-calibrated sensor cartridges or easy on site-calibration.
  • Tough, rugged, glass-fibre reinforced, Impact resistant, fully gasketed
    Polycarbonate IP 65 enclosure.
  • IP65 protected housing, with the provision of dust and moisture protection with
    Hydrophobic filter arrangement.
  • Monitoring of R454c can be achieved with our optional MSR centralized Gas control and monitoring system to meet the global ventilation standards like:

o EN 378
o EN 14624
o EN 45544-1
o EN 61508-1-3
o EN 61010-1
o ANSI/UL 61010 1
o CAN/CSA-C22.2 No. 61010-1

  • Optional:
    • Without housing
    • With housing Plastic: Type D, 94 x 65 x 57 mm
    • 4-20 mA output signal
    • 2-10 V output signal
    • With display for values and operation, 2x open collector for horn and warning lamp

Built for standard output of 4-20 mA / 2-10V analog signal output, this transmitter is compatible with the PolyGard 2 series controllers & Sensor Boards as well as any other electronic control or automation system.

 



Additional Information:

  • Production Capacity: 100
  • Delivery Time: 2-8 weeks
Get Best Quote Request Callback
Refrigerant R507a Gas Sensor Transmitter

Refrigerant R507a Gas Sensor Transmitter

Product Price: Rs 1 / UnitGet Best Price

Product Brochure

Product Details:
Gas TypeRefrigerant Gas
Sensor Typesemiconductor
Model Name/NumberR4507a
BrandMSR Germany
Voltage24vdc
Display TypeDigital
Output Signal4-20mA
MaterialPolycarbonate

μGard®2 R507a Freon and Refrigerants Gas Transmitter MC2-X-S2080-07-A-X-X GasAlarm

μGard®2 (developed by MSR) is the new exchangeable sensor unit that is capable of digital value processing, temperature compensation, and self-control for the continuous monitoring of the ambient air to detect R507a refrigerant gas.

The MC2-X-S2080-07-A-X-X is a sensor element at its core with many possible customizations. The beauty of the microgard 2 system is a microcontroller integrated into the Semi-Conductor R507a sensor module. The integrated temperature compensation ensures the highest accuracy, selectivity and reliability despite the long calibration interval. The microcontroller calculates a linear 4-20 mA (or 2-10V) signal out of the measurement signal of the Semi-Conductor sensor and also stores all relevant measured values and data of the sensor element.

Calibration is a breeze with this modular design allowing easy swapping of the sensor unit or via the use of the integrated calibration routine directly at the system.

FEATURES

  • Digital measurement value processing incl. temperature compensation
  • Data / Measured values stored in the microcontroller on the sensor unit allowing easy swap of an old sensor with a newly calibrated sensor.
  • High accuracy, selectivity, and reliability
  • Low zero point drift
  • Sensor lifetime: > 5 years / normal environment
  • SIL2 Compliant development process
  • Easy maintenance and calibration by the exchange of the sensor module or by integrated on-site calibration.
  • 4-20 mA (or 2-10V) analog output with selectable signal output for special mode, fault, etc.
  • Reverse polarity protected, overload and short-circuit proof
  • Integrated heating down to -35°C
  • Plug and play type concept for field calibration, laboratory calibration and site calibration (where the housing of the gas sensor remains on to the wall with cable wiring and later sensor cell transmitter cartridge can be plugin after calibration)
  • Smart digital type calibration facility with an indication of the life of the sensor cell.
  • Simplified maintenance via the exchange of pre-calibrated sensor cartridges or easy on site-calibration.
  • Tough, rugged, glass-fibre reinforced, Impact resistant, fully gasketed
    Polycarbonate IP 65 enclosure.
  • IP65 protected housing, with the provision of dust and moisture protection with
    Hydrophobic filter arrangement.
  • Monitoring of R507a can be achieved with our optional MSR centralized Gas control and monitoring system to meet the global ventilation standards like:

o EN 378
o EN 14624
o EN 45544-1
o EN 61508-1-3
o EN 61010-1
o ANSI/UL 61010 1
o CAN/CSA-C22.2 No. 61010-1

  • Optional:
    • Without housing
    • With housing Plastic: Type D, 94 x 65 x 57 mm
    • 4-20 mA output signal
    • 2-10 V output signal
    • With display for values and operation, 2x open collector for horn and warning lamp

Built for standard output of 4-20 mA / 2-10V analog signal output, this transmitter is compatible with the PolyGard 2 series controllers & Sensor Boards as well as any other electronic control or automation system.

 



Additional Information:

  • Production Capacity: 100
  • Delivery Time: 2-8 weeks
Get Best Quote Request Callback
Refrigerant R23 Gas Sensor Transmitter
  • Refrigerant R23 Gas Sensor Transmitter
  • Refrigerant R23 Gas Sensor Transmitter
  • Refrigerant R23 Gas Sensor Transmitter

Refrigerant R23 Gas Sensor Transmitter

Product Price: Rs 50,000 / UnitGet Best Price

Product Brochure

Product Details:
Specific NameR22
Sensor Typesemiconductor
BrandMSR Germany
TypeHcfcs
Output Signal4-20mA

μGard®2 R23 Freon and Refrigerants Gas Transmitter MC2-X-S2061-01-A-X-X GasAlarm

μGard®2 (developed by MSR) is the new exchangeable sensor unit that is capable of digital value processing, temperature compensation, and self-control for the continuous monitoring of the ambient air to detect R23 refrigerant gas.

 

The MC2-X-S2061-01-A-X-X is a sensor element at its core with many possible customizations. The beauty of the microgard 2 system is a microcontroller integrated into the Semi-Conductor R23 sensor module. The integrated temperature compensation ensures the highest accuracy, selectivity and reliability despite the long calibration interval. The microcontroller calculates a linear 4-20 mA (or 2-10V) signal out of the measurement signal of the Semi-Conductor sensor and also stores all relevant measured values and data of the sensor element.

Calibration is a breeze with this modular design allowing easy swapping of the sensor unit or via the use of the integrated calibration routine directly at the system.

FEATURES

  • Digital measurement value processing incl. temperature compensation
  • Data / Measured values stored in the microcontroller on the sensor unit allowing easy swap of an old sensor with a newly calibrated sensor.
  • High accuracy, selectivity, and reliability
  • Low zero point drift
  • Sensor lifetime: > 5 years / normal environment
  • SIL2 Compliant development process
  • Easy maintenance and calibration by the exchange of the sensor module or by integrated on-site calibration.
  • 4-20 mA (or 2-10V) analog output with selectable signal output for special mode, fault, etc.
  • Reverse polarity protected, overload and short-circuit proof
  • Integrated heating down to -35°C
  • Plug and play type concept for field calibration, laboratory calibration and site calibration (where the housing of the gas sensor remains on to the wall with cable wiring and later sensor cell transmitter cartridge can be plugin after calibration)
  • Smart digital type calibration facility with an indication of the life of the sensor cell.
  • Simplified maintenance via the exchange of pre-calibrated sensor cartridges or easy on site-calibration.
  • Tough, rugged, glass-fibre reinforced, Impact resistant, fully gasketed
    Polycarbonate IP 65 enclosure.
  • IP65 protected housing, with the provision of dust and moisture protection with
    Hydrophobic filter arrangement.
  • Monitoring of R23 can be achieved with our optional MSR centralized Gas control and monitoring system to meet the global ventilation standards like:

o EN 378
o EN 14624
o EN 45544-1
o EN 61508-1-3
o EN 61010-1
o ANSI/UL 61010 1
o CAN/CSA-C22.2 No. 61010-1

  • Optional:
    • Without housing
    • With housing Plastic: Type D, 94 x 65 x 57 mm
    • 4-20 mA output signal
    • 2-10 V output signal
    • With display for values and operation, 2x open collector for horn and warning lamp

Built for standard output of 4-20 mA / 2-10V analog signal output, this transmitter is compatible with the PolyGard 2 series controllers & Sensor Boards as well as any other electronic control or automation system.

Should you have any questions or concerns regarding this matter, please feel free to contact us or reach our experts to info



Additional Information:

  • Production Capacity: 100
  • Delivery Time: 2-8 weeks
Get Best Quote Request Callback
Refrigerant R452a Gas Sensor Transmitter

Refrigerant R452a Gas Sensor Transmitter

Product Price: Rs 1 / UnitGet Best Price

Product Brochure

Product Details:
Gas TypeRefrigerant Gas
Sensor Typesemiconductor
BrandMSR Germany
Model Name/NumberR452a
Voltage24vdc

μGard®2 R452a Freon and Refrigerants Gas Transmitter MC2-X-S2063-02-A-X-X GasAlarm

μGard®2 (developed by MSR) is the new exchangeable sensor unit that is capable of digital value processing, temperature compensation, and self-control for the continuous monitoring of the ambient air to detect R452a refrigerant gas.

The MC2-X-S2063-02-A-X-X is a sensor element at its core with many possible customizations. The beauty of the microgard 2 system is a microcontroller integrated into the Semi-Conductor R452a sensor module. The integrated temperature compensation ensures the highest accuracy, selectivity and reliability despite the long calibration interval. The microcontroller calculates a linear 4-20 mA (or 2-10V) signal out of the measurement signal of the Semi-Conductor sensor and also stores all relevant measured values and data of the sensor element.

Calibration is a breeze with this modular design allowing easy swapping of the sensor unit or via the use of the integrated calibration routine directly at the system.

FEATURES

  • Digital measurement value processing incl. temperature compensation
  • Data / Measured values stored in the microcontroller on the sensor unit allowing easy swap of an old sensor with a newly calibrated sensor.
  • High accuracy, selectivity, and reliability
  • Low zero point drift
  • Sensor lifetime: > 5 years / normal environment
  • SIL2 Compliant development process
  • Easy maintenance and calibration by the exchange of the sensor module or by integrated on-site calibration.
  • 4-20 mA (or 2-10V) analog output with selectable signal output for special mode, fault, etc.
  • Reverse polarity protected, overload and short-circuit proof
  • Integrated heating down to -35°C
  • Plug and play type concept for field calibration, laboratory calibration and site calibration (where the housing of the gas sensor remains on to the wall with cable wiring and later sensor cell transmitter cartridge can be plugin after calibration)
  • Smart digital type calibration facility with an indication of the life of the sensor cell.
  • Simplified maintenance via the exchange of pre-calibrated sensor cartridges or easy on site-calibration.
  • Tough, rugged, glass-fibre reinforced, Impact resistant, fully gasketed
    Polycarbonate IP 65 enclosure.
  • IP65 protected housing, with the provision of dust and moisture protection with
    Hydrophobic filter arrangement.
  • Monitoring of R452a can be achieved with our optional MSR centralized Gas control and monitoring system to meet the global ventilation standards like:

o EN 378
o EN 14624
o EN 45544-1
o EN 61508-1-3
o EN 61010-1
o ANSI/UL 61010 1
o CAN/CSA-C22.2 No. 61010-1

  • Optional:
    • Without housing
    • With housing Plastic: Type D, 94 x 65 x 57 mm
    • 4-20 mA output signal
    • 2-10 V output signal
    • With display for values and operation, 2x open collector for horn and warning lamp

Built for standard output of 4-20 mA / 2-10V analog signal output, this transmitter is compatible with the PolyGard 2 series controllers & Sensor Boards as well as any other electronic control or automation system.

 



Additional Information:

  • Production Capacity: 100
  • Delivery Time: 2-8 weeks
Get Best Quote Request Callback
Refrigerant R125 Gas Sensor Transmitter
  • Refrigerant R125 Gas Sensor Transmitter
  • Refrigerant R125 Gas Sensor Transmitter
  • Refrigerant R125 Gas Sensor Transmitter
  • Refrigerant R125 Gas Sensor Transmitter

Refrigerant R125 Gas Sensor Transmitter

Price on Request

Product Brochure

Product Details:
Gas Typerefrigerant gas
Sensor Typesemiconductor
Model Name/NumberR125
BrandMSR Germany
Voltage24vdc
Frequency20-2000ppm
Display TypeDigital
Output Signal4-20mA
MaterialPolycarbonate

μGard®2 R125 Freon and Refrigerants Gas Transmitter MC2-X-S2080-01-A -X-X GasAlarm

μGard®2 (developed by MSR) is the new exchangeable sensor unit that is capable of digital value processing, temperature compensation, and self-control for the continuous monitoring of the ambient air to detect R125 refrigerant gas.

The MC2-X-S2080-01-A -X-X is a sensor element at its core with many possible customizations. The beauty of the microgard 2 system is a microcontroller integrated into the Semi-Conductor R125 sensor module. The integrated temperature compensation ensures the highest accuracy, selectivity and reliability despite the long calibration interval. The microcontroller calculates a linear 4-20 mA (or 2-10V) signal out of the measurement signal of the Semi-Conductor sensor and also stores all relevant measured values and data of the sensor element.

Calibration is a breeze with this modular design allowing easy swapping of the sensor unit or via the use of the integrated calibration routine directly at the system.

FEATURES

  • Digital measurement value processing incl. temperature compensation
  • Data / Measured values stored in the microcontroller on the sensor unit allowing easy swap of an old sensor with a newly calibrated sensor.
  • High accuracy, selectivity, and reliability
  • Low zero point drift
  • Sensor lifetime: > 5 years / normal environment
  • SIL2 Compliant development process
  • Easy maintenance and calibration by the exchange of the sensor module or by integrated on-site calibration.
  • 4-20 mA (or 2-10V) analog output with selectable signal output for special mode, fault, etc.
  • Reverse polarity protected, overload and short-circuit proof
  • Integrated heating down to -35°C
  • Plug and play type concept for field calibration, laboratory calibration and site calibration (where the housing of the gas sensor remains on to the wall with cable wiring and later sensor cell transmitter cartridge can be plugin after calibration)
  • Smart digital type calibration facility with an indication of the life of the sensor cell.
  • Simplified maintenance via the exchange of pre-calibrated sensor cartridges or easy on site-calibration.
  • Tough, rugged, glass-fibre reinforced, Impact resistant, fully gasketed
    Polycarbonate IP 65 enclosure.
  • IP65 protected housing, with the provision of dust and moisture protection with
    Hydrophobic filter arrangement.
  • Monitoring of R125 can be achieved with our optional MSR centralized Gas control and monitoring system to meet the global ventilation standards like:

o EN 378
o EN 14624
o EN 45544-1
o EN 61508-1-3
o EN 61010-1
o ANSI/UL 61010 1
o CAN/CSA-C22.2 No. 61010-1

  • Optional:
    • Without housing
    • With housing Plastic: Type D, 94 x 65 x 57 mm
    • 4-20 mA output signal
    • 2-10 V output signal
    • With display for values and operation, 2x open collector for horn and warning lamp

Built for standard output of 4-20 mA / 2-10V analog signal output, this transmitter is compatible with the PolyGard 2 series controllers & Sensor Boards as well as any other electronic control or automation system.

Should you have any questions or concerns regarding this matter, please feel free to contact us or reach our experts to info


 



Additional Information:

  • Production Capacity: 100
  • Delivery Time: 2-8 weeks
Get Best Quote Request Callback
Refrigerant R143b Gas Sensor Transmitter
  • Refrigerant R143b Gas Sensor Transmitter
  • Refrigerant R143b Gas Sensor Transmitter
  • Refrigerant R143b Gas Sensor Transmitter

Refrigerant R143b Gas Sensor Transmitter

Price on Request

Product Brochure

Product Details:
Gas TypeRefrigerant Gas
Sensor Typesemiconductor
BrandMSR Germany
Model Name/NumberR143b
Voltage24vdc
Frequency20-2000ppm
Output Signal4-20mA
MaterialPolycarbonate

μGard®2 R143b Freon and Refrigerants Gas Transmitter MC2-X-S2080-10-A-X-X GasAlarm

μGard®2 (developed by MSR) is the new exchangeable sensor unit that is capable of digital value processing, temperature compensation, and self-control for the continuous monitoring of the ambient air to detect R143b refrigerant gas.

The MC2-X-S2080-10-A-X-X is a sensor element at its core with many possible customizations. The beauty of the microgard 2 system is a microcontroller integrated into the Semi-Conductor R143b sensor module. The integrated temperature compensation ensures the highest accuracy, selectivity and reliability despite the long calibration interval. The microcontroller calculates a linear 4-20 mA (or 2-10V) signal out of the measurement signal of the Semi-Conductor sensor and also stores all relevant measured values and data of the sensor element.

Calibration is a breeze with this modular design allowing easy swapping of the sensor unit or via the use of the integrated calibration routine directly at the system.

FEATURES

  • Digital measurement value processing incl. temperature compensation
  • Data / Measured values stored in the microcontroller on the sensor unit allowing easy swap of an old sensor with a newly calibrated sensor.
  • High accuracy, selectivity, and reliability
  • Low zero point drift
  • Sensor lifetime: > 5 years / normal environment
  • SIL2 Compliant development process
  • Easy maintenance and calibration by the exchange of the sensor module or by integrated on-site calibration.
  • 4-20 mA (or 2-10V) analog output with selectable signal output for special mode, fault, etc.
  • Reverse polarity protected, overload and short-circuit proof
  • Integrated heating down to -35°C
  • Plug and play type concept for field calibration, laboratory calibration and site calibration (where the housing of the gas sensor remains on to the wall with cable wiring and later sensor cell transmitter cartridge can be plugin after calibration)
  • Smart digital type calibration facility with an indication of the life of the sensor cell.
  • Simplified maintenance via the exchange of pre-calibrated sensor cartridges or easy on site-calibration.
  • Tough, rugged, glass-fibre reinforced, Impact resistant, fully gasketed
    Polycarbonate IP 65 enclosure.
  • IP65 protected housing, with the provision of dust and moisture protection with
    Hydrophobic filter arrangement.
  • Monitoring of R143b can be achieved with our optional MSR centralized Gas control and monitoring system to meet the global ventilation standards like:

o EN 378
o EN 14624
o EN 45544-1
o EN 61508-1-3
o EN 61010-1
o ANSI/UL 61010 1
o CAN/CSA-C22.2 No. 61010-1

  • Optional:
    • Without housing
    • With housing Plastic: Type D, 94 x 65 x 57 mm
    • 4-20 mA output signal
    • 2-10 V output signal
    • With display for values and operation, 2x open collector for horn and warning lamp

Built for standard output of 4-20 mA / 2-10V analog signal output, this transmitter is compatible with the PolyGard 2 series controllers & Sensor Boards as well as any other electronic control or automation system.

Should you have any questions or concerns regarding this matter, please feel free to contact us or reach our experts to info



Additional Information:

  • Production Capacity: 100
  • Delivery Time: 2-8 weeks
Get Best Quote Request Callback
Refrigerant R402a Gas Sensor Transmitter
  • Refrigerant R402a Gas Sensor Transmitter
  • Refrigerant R402a Gas Sensor Transmitter
  • Refrigerant R402a Gas Sensor Transmitter

Refrigerant R402a Gas Sensor Transmitter

Price on Request

Product Brochure

Product Details:
Minimum Order Quantity1 Unit
Gas TypeRefrigerant Gas
Sensor Typesemiconductor
Model Name/NumberR402a
BrandMSR Germany
Voltage24vdc
Frequency20-2000ppm
Display TypeDigital
Output Signal4-20mA
MaterialPolycarbonate

Gard2 R402a Freon and Refrigerants Gas Transmitter MC2-X-S2070-04-A -X-X GasAlarm

Gard2 (developed by MSR) is the new exchangeable sensor unit that is capable of digital value processing, temperature compensation, and self-control for the continuous monitoring of the ambient air to detect R402a refrigerant gas.

The MC2-X-S2070-04-A -X-X is a sensor element at its core with many possible customizations. The beauty of the microgard 2 system is a microcontroller integrated into the Semi-Conductor R402a sensor module. The integrated temperature compensation ensures the highest accuracy, selectivity and reliability despite the long calibration interval. The microcontroller calculates a linear 4-20 mA (or 2-10V) signal out of the measurement signal of the Semi-Conductor sensor and also stores all relevant measured values and data of the sensor element.

Calibration is a breeze with this modular design allowing easy swapping of the sensor unit or via the use of the integrated calibration routine directly at the system.

FEATURES

  • Digital measurement value processing incl. temperature compensation
  • Data / Measured values stored in the microcontroller on the sensor unit allowing easy swap of an old sensor with a newly calibrated sensor.
  • High accuracy, selectivity, and reliability
  • Low zero point drift
  • Sensor lifetime: > 5 years / normal environment
  • SIL2 Compliant development process
  • Easy maintenance and calibration by the exchange of the sensor module or by integrated on-site calibration.
  • 4-20 mA (or 2-10V) analog output with selectable signal output for special mode, fault, etc.
  • Reverse polarity protected, overload and short-circuit proof
  • Integrated heating down to -35°C
  • Plug and play type concept for field calibration, laboratory calibration and site calibration (where the housing of the gas sensor remains on to the wall with cable wiring and later sensor cell transmitter cartridge can be plugin after calibration)
  • Smart digital type calibration facility with an indication of the life of the sensor cell.
  • Simplified maintenance via the exchange of pre-calibrated sensor cartridges or easy on site-calibration.
  • Tough, rugged, glass-fibre reinforced, Impact resistant, fully gasketed
    Polycarbonate IP 65 enclosure.
  • IP65 protected housing, with the provision of dust and moisture protection with
    Hydrophobic filter arrangement.
  • Monitoring of R402a can be achieved with our optional MSR centralized Gas control and monitoring system to meet the global ventilation standards like:

o EN 378
o EN 14624
o EN 45544-1
o EN 61508-1-3
o EN 61010-1
o ANSI/UL 61010 1
o CAN/CSA-C22.2 No. 61010-1

  • Optional:
    • Without housing
    • With housing Plastic: Type D, 94 x 65 x 57 mm
    • 4-20 mA output signal
    • 2-10 V output signal
    • With display for values and operation, 2x open collector for horn and warning lamp

Built for standard output of 4-20 mA / 2-10V analog signal output, this transmitter is compatible with the PolyGard 2 series controllers & Sensor Boards as well as any other electronic control or automation system.

Should you have any questions or concerns regarding this matter, please feel free to contact us or reach our experts to



Additional Information:

  • Production Capacity: 100
  • Delivery Time: 2-8 weeks
Get Best Quote Request Callback
Refrigerant  R402b Gas Sensor Transmitter

Refrigerant R402b Gas Sensor Transmitter

Price on Request

Product Brochure

Product Details:
Gas TypeRefrigerant Gas
Sensor TypeSemiconductor
BrandMSR Germany
Model Name/NumberR402b
Voltage24vdc
Frequency20-2000ppm
Display TypeDigital
Output Signal4-20mA
MaterialPolycarbonate

uGard2 R402b Freon and Refrigerants Gas Transmitter MC2-X-S2070-05-A -X-X GasAlarm

uGard2 (developed by MSR) is the new exchangeable sensor unit that is capable of digital value processing, temperature compensation, and self-control for the continuous monitoring of the ambient air to detect R402b refrigerant gas.

The MC2-X-S2070-05-A -X-X is a sensor element at its core with many possible customizations. The beauty of the microgard 2 system is a microcontroller integrated into the Semi-Conductor R402b sensor module. The integrated temperature compensation ensures the highest accuracy, selectivity and reliability despite the long calibration interval. The microcontroller calculates a linear 4-20 mA (or 2-10V) signal out of the measurement signal of the Semi-Conductor sensor and also stores all relevant measured values and data of the sensor element.

Calibration is a breeze with this modular design allowing easy swapping of the sensor unit or via the use of the integrated calibration routine directly at the system.

FEATURES

  • Digital measurement value processing incl. temperature compensation
  • Data / Measured values stored in the microcontroller on the sensor unit allowing easy swap of an old sensor with a newly calibrated sensor.
  • High accuracy, selectivity, and reliability
  • Low zero point drift
  • Sensor lifetime: > 5 years / normal environment
  • SIL2 Compliant development process
  • Easy maintenance and calibration by the exchange of the sensor module or by integrated on-site calibration.
  • 4-20 mA (or 2-10V) analog output with selectable signal output for special mode, fault, etc.
  • Reverse polarity protected, overload and short-circuit proof
  • Integrated heating down to -35°C
  • Plug and play type concept for field calibration, laboratory calibration and site calibration (where the housing of the gas sensor remains on to the wall with cable wiring and later sensor cell transmitter cartridge can be plugin after calibration)
  • Smart digital type calibration facility with an indication of the life of the sensor cell.
  • Simplified maintenance via the exchange of pre-calibrated sensor cartridges or easy on site-calibration.
  • Tough, rugged, glass-fibre reinforced, Impact resistant, fully gasketed
    Polycarbonate IP 65 enclosure.
  • IP65 protected housing, with the provision of dust and moisture protection with
    Hydrophobic filter arrangement.
  • Monitoring of R402b can be achieved with our optional MSR centralized Gas control and monitoring system to meet the global ventilation standards like:

o EN 378
o EN 14624
o EN 45544-1
o EN 61508-1-3
o EN 61010-1
o ANSI/UL 61010 1
o CAN/CSA-C22.2 No. 61010-1

  • Optional:
    • Without housing
    • With housing Plastic: Type D, 94 x 65 x 57 mm
    • 4-20 mA output signal
    • 2-10 V output signal
    • With display for values and operation, 2x open collector for horn and warning lamp

Built for standard output of 4-20 mA / 2-10V analog signal output, this transmitter is compatible with the PolyGard 2 series controllers & Sensor Boards as well as any other electronic control or automation system.

Should you have any questions or concerns regarding this matter, please feel free to contact us or reach our experts to



Additional Information:

  • Production Capacity: 100
  • Delivery Time: 2-8 weeks
Get Best Quote Request Callback
Refrigerant R455a Gas Sensor Transmitter

Refrigerant R455a Gas Sensor Transmitter

Price on Request

Product Brochure

Product Details:
Gas TypeRefrigerant Gas
Sensor Typesemiconductor
Model Name/NumberR455a
BrandMSR Germany
Voltage24vdc
Frequency20-2000ppm
Display TypeDigital
Output Signal4-20mA
MaterialPolycarbonate

μGard®2 R455a Freon and Refrigerants Gas Transmitter MC2-X-S2063-05-A-X-X GasAlarm

μGard®2 (developed by MSR) is the new exchangeable sensor unit that is capable of digital value processing, temperature compensation, and self-control for the continuous monitoring of the ambient air to detect R455a refrigerant gas.

The MC2-X-S2063-05-A-X-X is a sensor element at its core with many possible customizations. The beauty of the microgard 2 system is a microcontroller integrated into the Semi-Conductor R455a sensor module. The integrated temperature compensation ensures the highest accuracy, selectivity and reliability despite the long calibration interval. The microcontroller calculates a linear 4-20 mA (or 2-10V) signal out of the measurement signal of the Semi-Conductor sensor and also stores all relevant measured values and data of the sensor element.

Calibration is a breeze with this modular design allowing easy swapping of the sensor unit or via the use of the integrated calibration routine directly at the system.

FEATURES

  • Digital measurement value processing incl. temperature compensation
  • Data / Measured values stored in the microcontroller on the sensor unit allowing easy swap of an old sensor with a newly calibrated sensor.
  • High accuracy, selectivity, and reliability
  • Low zero point drift
  • Sensor lifetime: > 5 years / normal environment
  • SIL2 Compliant development process
  • Easy maintenance and calibration by the exchange of the sensor module or by integrated on-site calibration.
  • 4-20 mA (or 2-10V) analog output with selectable signal output for special mode, fault, etc.
  • Reverse polarity protected, overload and short-circuit proof
  • Integrated heating down to -35°C
  • Plug and play type concept for field calibration, laboratory calibration and site calibration (where the housing of the gas sensor remains on to the wall with cable wiring and later sensor cell transmitter cartridge can be plugin after calibration)
  • Smart digital type calibration facility with an indication of the life of the sensor cell.
  • Simplified maintenance via the exchange of pre-calibrated sensor cartridges or easy on site-calibration.
  • Tough, rugged, glass-fibre reinforced, Impact resistant, fully gasketed
    Polycarbonate IP 65 enclosure.
  • IP65 protected housing, with the provision of dust and moisture protection with
    Hydrophobic filter arrangement.
  • Monitoring of R455a can be achieved with our optional MSR centralized Gas control and monitoring system to meet the global ventilation standards like:

o EN 378
o EN 14624
o EN 45544-1
o EN 61508-1-3
o EN 61010-1
o ANSI/UL 61010 1
o CAN/CSA-C22.2 No. 61010-1

  • Optional:
    • Without housing
    • With housing Plastic: Type D, 94 x 65 x 57 mm
    • 4-20 mA output signal
    • 2-10 V output signal
    • With display for values and operation, 2x open collector for horn and warning lamp

Built for standard output of 4-20 mA / 2-10V analog signal output, this transmitter is compatible with the PolyGard 2 series controllers & Sensor Boards as well as any other electronic control or automation system.

 



Additional Information:

  • Production Capacity: 100
  • Delivery Time: 2-8 weeks
Get Best Quote Request Callback
Refrigerant  R508b Gas Sensor Transmitter
  • Refrigerant  R508b Gas Sensor Transmitter
  • Refrigerant  R508b Gas Sensor Transmitter

Refrigerant R508b Gas Sensor Transmitter

Price on Request

Product Brochure

Product Details:
Gas TypeRefrigerant Gas
Sensor Typesemiconductor
BrandMSR Germany
Model Name/NumberR508b
Voltage24vdc
Display TypeDigital
Output Signal4-20mA
MaterialPolycarbonate

μGard®2 R508b Freon and Refrigerants Gas Transmitter MC2-X-S2061-02-A-X-X GasAlarm

μGard®2 (developed by MSR) is the new exchangeable sensor unit that is capable of digital value processing, temperature compensation, and self-control for the continuous monitoring of the ambient air to detect R508b refrigerant gas.

The MC2-X-S2061-02-A-X-X is a sensor element at its core with many possible customizations. The beauty of the microgard 2 system is a microcontroller integrated into the Semi-Conductor R508b sensor module. The integrated temperature compensation ensures the highest accuracy, selectivity and reliability despite the long calibration interval. The microcontroller calculates a linear 4-20 mA (or 2-10V) signal out of the measurement signal of the Semi-Conductor sensor and also stores all relevant measured values and data of the sensor element.

Calibration is a breeze with this modular design allowing easy swapping of the sensor unit or via the use of the integrated calibration routine directly at the system.

FEATURES

  • Digital measurement value processing incl. temperature compensation
  • Data / Measured values stored in the microcontroller on the sensor unit allowing easy swap of an old sensor with a newly calibrated sensor.
  • High accuracy, selectivity, and reliability
  • Low zero point drift
  • Sensor lifetime: > 5 years / normal environment
  • SIL2 Compliant development process
  • Easy maintenance and calibration by the exchange of the sensor module or by integrated on-site calibration.
  • 4-20 mA (or 2-10V) analog output with selectable signal output for special mode, fault, etc.
  • Reverse polarity protected, overload and short-circuit proof
  • Integrated heating down to -35°C
  • Plug and play type concept for field calibration, laboratory calibration and site calibration (where the housing of the gas sensor remains on to the wall with cable wiring and later sensor cell transmitter cartridge can be plugin after calibration)
  • Smart digital type calibration facility with an indication of the life of the sensor cell.
  • Simplified maintenance via the exchange of pre-calibrated sensor cartridges or easy on site-calibration.
  • Tough, rugged, glass-fibre reinforced, Impact resistant, fully gasketed
    Polycarbonate IP 65 enclosure.
  • IP65 protected housing, with the provision of dust and moisture protection with
    Hydrophobic filter arrangement.
  • Monitoring of R508b can be achieved with our optional MSR centralized Gas control and monitoring system to meet the global ventilation standards like:

o EN 378
o EN 14624
o EN 45544-1
o EN 61508-1-3
o EN 61010-1
o ANSI/UL 61010 1
o CAN/CSA-C22.2 No. 61010-1

  • Optional:
    • Without housing
    • With housing Plastic: Type D, 94 x 65 x 57 mm
    • 4-20 mA output signal
    • 2-10 V output signal
    • With display for values and operation, 2x open collector for horn and warning lamp

Built for standard output of 4-20 mA / 2-10V analog signal output, this transmitter is compatible with the PolyGard 2 series controllers & Sensor Boards as well as any other electronic control or automation system.

 



Additional Information:

  • Production Capacity: 100
  • Delivery Time: 2-8 weeks
Get Best Quote Request Callback
Refrigerant R22 Gas Sensor Transmitter

Refrigerant R22 Gas Sensor Transmitter

Price on Request

Product Brochure

μGard®2 R123 Freon and Refrigerants Gas Transmitter MC2-X-S2064-01-A -X-X GasAlarm

μGard®2 (developed by MSR) is the new exchangeable sensor unit that is capable of digital value processing, temperature compensation, and self-control for the continuous monitoring of the ambient air to detect R123 refrigerant gas.

The MC2-X-S2064-01-A -X-X is a sensor element at its core with many possible customizations. The beauty of the microgard 2 system is a microcontroller integrated into the Semi-Conductor R123 sensor module. The integrated temperature compensation ensures the highest accuracy, selectivity and reliability despite the long calibration interval. The microcontroller calculates a linear 4-20 mA (or 2-10V) signal out of the measurement signal of the Semi-Conductor sensor and also stores all relevant measured values and data of the sensor element.

Calibration is a breeze with this modular design allowing easy swapping of the sensor unit or via the use of the integrated calibration routine directly at the system.

FEATURES

  • Digital measurement value processing incl. temperature compensation
  • Data / Measured values stored in the microcontroller on the sensor unit allowing easy swap of an old sensor with a newly calibrated sensor.
  • High accuracy, selectivity, and reliability
  • Low zero point drift
  • Sensor lifetime: > 5 years / normal environment
  • SIL2 Compliant development process
  • Easy maintenance and calibration by the exchange of the sensor module or by integrated on-site calibration.
  • 4-20 mA (or 2-10V) analog output with selectable signal output for special mode, fault, etc.
  • Reverse polarity protected, overload and short-circuit proof
  • Integrated heating down to -35°C
  • Plug and play type concept for field calibration, laboratory calibration and site calibration (where the housing of the gas sensor remains on to the wall with cable wiring and later sensor cell transmitter cartridge can be plugin after calibration)
  • Smart digital type calibration facility with an indication of the life of the sensor cell.
  • Simplified maintenance via the exchange of pre-calibrated sensor cartridges or easy on site-calibration.
  • Tough, rugged, glass-fibre reinforced, Impact resistant, fully gasketed
    Polycarbonate IP 65 enclosure.
  • IP65 protected housing, with the provision of dust and moisture protection with
    Hydrophobic filter arrangement.
  • Monitoring of R123 can be achieved with our optional MSR centralized Gas control and monitoring system to meet the global ventilation standards like:

o EN 378
o EN 14624
o EN 45544-1
o EN 61508-1-3
o EN 61010-1
o ANSI/UL 61010 1
o CAN/CSA-C22.2 No. 61010-1

  • Optional:
    • Without housing
    • With housing Plastic: Type D, 94 x 65 x 57 mm
    • 4-20 mA output signal
    • 2-10 V output signal
    • With display for values and operation, 2x open collector for horn and warning lamp

Built for standard output of 4-20 mA / 2-10V analog signal output, this transmitter is compatible with the PolyGard 2 series controllers & Sensor Boards as well as any other electronic control or automation system.

Should you have any questions or concerns regarding this matter, please feel free to contact us or reach our experts to info

Get Best Quote Request Callback
MSR Germany Refrigerant R23 Gas Detector
  • MSR Germany Refrigerant R23 Gas Detector
  • MSR Germany Refrigerant R23 Gas Detector

MSR Germany Refrigerant R23 Gas Detector

Product Price: Rs 50,000 / PieceGet Best Price

Product Brochure

μGard®2 R23  Freon and Refrigerants Gas Transmitter MC2-X-S2061-01-A-X-X GasAlarm

μGard®2 (developed by MSR) is the new exchangeable sensor unit that is capable of digital value processing, temperature compensation, and self-control for the continuous monitoring of the ambient air to detect R23 refrigerant gas.

The MC2-X-S2061-01-A-X-X is a sensor element at its core with many possible customizations. The beauty of the microgard 2 system is a microcontroller integrated into the Semi-Conductor R23 sensor module. The integrated temperature compensation ensures the highest accuracy, selectivity and reliability despite the long calibration interval. The microcontroller calculates a linear 4-20 mA (or 2-10V) signal out of the measurement signal of the Semi-Conductor sensor and also stores all relevant measured values and data of the sensor element.

Calibration is a breeze with this modular design allowing easy swapping of the sensor unit or via the use of the integrated calibration routine directly at the system.

FEATURES

  • Digital measurement value processing incl. temperature compensation
  • Data / Measured values stored in the microcontroller on the sensor unit allowing easy swap of an old sensor with a newly calibrated sensor.
  • High accuracy, selectivity, and reliability
  • Low zero point drift
  • Sensor lifetime: > 5 years / normal environment
  • SIL2 Compliant development process
  • Easy maintenance and calibration by the exchange of the sensor module or by integrated on-site calibration.
  • 4-20 mA (or 2-10V) analog output with selectable signal output for special mode, fault, etc.
  • Reverse polarity protected, overload and short-circuit proof
  • Integrated heating down to -35°C
  • Plug and play type concept for field calibration, laboratory calibration and site calibration (where the housing of the gas sensor remains on to the wall with cable wiring and later sensor cell transmitter cartridge can be plugin after calibration)
  • Smart digital type calibration facility with an indication of the life of the sensor cell.
  • Simplified maintenance via the exchange of pre-calibrated sensor cartridges or easy on site-calibration.
  • Tough, rugged, glass-fibre reinforced, Impact resistant, fully gasketed
    Polycarbonate IP 65 enclosure.
  • IP65 protected housing, with the provision of dust and moisture protection with
    Hydrophobic filter arrangement.
  • Monitoring of R1234yf can be achieved with our optional MSR centralized Gas control and monitoring system to meet the global ventilation standards like:

o EN 378
o EN 14624
o EN 45544-1
o EN 61508-1-3
o EN 61010-1
o ANSI/UL 61010 1
o CAN/CSA-C22.2 No. 61010-1

  • Optional:
    • Without housing
    • With housing Plastic: Type D, 94 x 65 x 57 mm
    • 4-20 mA output signal
    • 2-10 V output signal
    • With display for values and operation, 2x open collector for horn and warning lamp

Built for standard output of 4-20 mA / 2-10V analog signal output, this transmitter is compatible with the PolyGard 2 series controllers & Sensor Boards as well as any other electronic control or automation system.

Should you have any questions or concerns regarding this matter, please feel free to contact us or reach our experts to info

Be sure, Be safe – Gas Detectors and Alarm Systems

Get Best Quote Request Callback

EXPLORE MORE CATEGORIES

Looking For "Freon and Refrigerants Gas Detector"?
Thank youYour Enquiry has been sent successfully.
© ALVI Automation India Private Limited. All Rights Reserved (Terms of Use)Developed and managed by IndiaMART InterMESH Ltd.