ALVI Automation India Private Limited
ALVI Automation India Private Limited
Kusum Vihar, Jaipur, Rajasthan
SEND SMS
SEND EMAIL

Level and Spill Control

JOLA Germany range of level controllers for all liquid applications, leakage detectors, detector for hydrocarbon spill on water, immersion probes, float switches, magnetic switches, level indicators, controllers for conductive liquids, plate and cable electrodes, floating electrodes including moisture film detection in data-centres. Most JOLA products carry VDE, ATEX hazardous area certification.

Level Measurement For Fuel (liquid) Oil Tank

Level Measurement For Fuel (liquid) Oil Tank
  • Level Measurement For Fuel (liquid) Oil Tank
Ask For Price
Product Price :Get Latest Price

Product Details:

Working Temperature-30 Degree C ~ 85 Degree C
TypeLevel Measurement
Signal Output4-20mA
UsageIndustrial

Precise control of level measurement for fuel oil tank is crucial in many applications. In process plants fuel oil is delivered to the storage tanks and then is transferred to process or may be a smaller day tank. It is very important to know the fuel oil level either in the storage tank or in a day tank for day-to-day operations of the plants.

The main aspect for level measurement for fuel oil tank is to keep track of inventory in terms of volume. Keeping good control over your inventory has become increasingly important over the last several years. Level measurement is one key component for reliable and accurate inventory control. Many processes require a steady supply of inputs . A storage tank between the supply and process acts as a buffer and maintains steady and consistent supply for the process. For a maximum process efficiency the tanks need to be filled to full capacity at all times.

Level is also measured for safety reasons. Filling vessels above their capacities can cause safety spills (overflowing) in open tanks leading to catastrophic results.. Preventing overfills and to ensure the storage tank is is always maintained within an appropriate supply, level measurement for fuel oil tank is very important.

Our Solution :
Our Jola TS/O immersion probe consists of a probe tube on which one or several floating switches are mounted along with a terminal box to which the floating switches are connected. The bottom floating switch falls together with the liquid to the minimum level and acts on the contactor when it falls below the horizontal. Liquid is then pumped into the tank. When the maximum level is reached, the top floating switch rises above the horizontal, the contactor holding circuit is interrupted and the filling process is stopped.
Request
Callback
Yes! I am interested

Jola Film Type Moisture Sensor

Jola Film Type Moisture Sensor
  • Jola Film Type Moisture Sensor
Ask For Price
Product Price :Get Latest Price

Product Details:

Probe Length70mm
Temperature Range0~100%
UsagePressure Sensor, Outdoor, measure soil moisture

Alvi Automation Gas Alarm System India Offer Jola Fts/ko-1 Film Type Moisture Or Condensation Sensor / Detector. Fts / Ko-1 Film Type Moisture Or Condensation Sensor / Detector For Cooling Ceiling Controller.

  • Clean Room, Pharmaceutical, Medical
  • It, Data Center
  • Marine, Naval, Defence, Army
  • Automobile, Power Plants, Hydro Plants
  • Machine Rooms, Electrical Room
  • Transportation, Cold Stores
  • Research, Education, Space Industry

Principle & Method:
Fts/ko-1 Film Sensor Is A Pcb Film Which Can Be Stuck To A Copper Pipe Or An Even Metal Surface. The Back Of The Film Sensor Is Coated With An Adhesive Agent And A Protective Film.
The Film Sensor Is Equipped With Parallel-routed Printed Conductors (Sensitive Surface) Which Are Gold-plated For Improved Surface Protection. The Sensor Acts As A Conductivity Measuring Cell. The Conductivity Is Measured Using Alternating Current In Order To Prevent Corrosion And Polarization Effects.
The Sensor Is Available With Connected 3-metre Long Thin White Wire. Other Connecting Line Lengths Are Available On Request. Care Should Always Be Taken To Ensure That The Sensitive Surface Of The Sensor Remains Grease-free And Is Not Treated With Chemical Substances, As These Can Severely Impair Or Even Completely Destroy The Functionality Of The Sensor. The Film Sensor Should Be Installed At The Point In The Cooling Ceiling System Where Moisture Is Most Probably Expected To Occur.

One Fts/ko-1 Film Sensor Can Be Connected To One :
Kur 5- Conductive Relay For U-bar Or Surface Mounting, With Connection Terminals On Top Of Housing And Red Led For Moisture Signaling. The Unit Is Designed For Switch Cabinet Mounting Or Installation In A Suitable Protective Housing And May Therefore Only Be Mounted/installed In These Locations. It Is Suitable For Use In Clean Environments Only.

The Kur 5 Cooling Ceiling Controller Is Designed To Measure The Moisture Between The Printed Conductors Of A Fts/ko-1 Film Sensor And To Switch The Built-in Output Relay When A Set Sensitivity Level Is Reached, Thus Permitting Activation Of An External Solenoid Valve.

Kur 5/g -conductive Relay In Surface-mount Housing With Transparent Cover, Green Mains Monitoring Indicator Led And Red Led For Moisture Signaling Inside The Housing.

The Kur 5/g Cooling Ceiling Controller Is Designed To Measure The Moisture Between The Printed Conductors Of A Fts/ko-1 Film Sensor And To Switch The Built-in Output Relay When A Set Sensitivity Level Is Reached, Thus Permitting Activation Of An External Solenoid Valve.

Kur-l4 - Conductive Relay In Surface-mount Housing, With Potential-free Make Contact Based On The Quiescent Current Principle, With Integrated Connecting Cable For Supply Voltage And Controlled Circuit. The Kur-l4 Compact Cooling Ceiling Controller Is Designed To Measure The Moisture Between The Printed Conductors Of A Fts/ko-1 Film Sensor And To Switch The Built-in Output Relay When A Set Sensitivity Level Is Reached, Thus Permitting Activation Of An External Solenoid Valve.
Request
Callback
Yes! I am interested

Gas Leak Detectors

Gas Leak Detectors
  • Gas Leak Detectors
Ask For Price
Product Price :Get Latest Price

Product Details:

TypeGas Leak Detectors
MaterialStainless Steel
Gas TypeNatural Gas
Power SourceBattery
Detector FeaturesAdjustable Sensitivity

ALVI Automation India INDIA Jola Float Switch - SSP Mercury Free For Liquid Level Detection, Jola float switch (mercury-free) for automatic control, regulation and signaling of liquid levels. Switching element:
  • Potential-free microswitch
  • Contact is effected by the rising and falling of the float with the liquid
  • For mounting from the side or from the top.

Features:
  • Model: SSP (for standard application, for light current application), for use in intrinsically safe circuits in mines susceptible to firedamp or in potentially explosive atmospheres in categories zone 1, 21, 2 or 22.
  • Operating principle -- ball-operated microswitch, potential-free changeover contact
  • Options for safety application –––– diodes or resistors
  • Recommended application –– via Jola protection relay
  • Float material -- PP
  • Seal material -- FPM / EPDM
  • Float protection class -- IP 68 / IP 68 T80°C
  • Max. immersion depth of the float -- max. 10 meters head of water at + 20°C

Applications of our float switches:
  • Regulate single and multiple levels
  • Low level sensing
  • High level alarm
  • Leak Detection
  • Overfill shut off
  • Level and Temperature Control
  • Turbulent liquids Industries that use our float switches:
  • Oil/Water Separators
  • Waste Water Treatment Equipment
  • Diesel Fuel /Oil tank and Transfer Systems
  • Fuel Management
  • Chemical Processing and Storage
  • Freon Recovery
  • Lubrication Equipment
  • Fluid Power
  • Heating Ventilation and Air Conditioning
  • Marine Applications Medical Equipment
  • Food Processing Equipment
  • Heavy Construction Equipment
Request
Callback
Yes! I am interested

Jola-kur 5 Film Sensor For Detection Of Moisture

Jola-kur 5 Film Sensor For Detection Of Moisture
  • Jola-kur 5 Film Sensor For Detection Of Moisture
Ask For Price
Product Price :Get Latest Price

Product Details:

VoltageAC 230 V
Temperature40 - 85 Degree C
UsageMagnetic Sensor
Rated Current5-50A

Gas Alarm Systems in association with Gas Alarm Systems Australia (offer Jola– KUR 5film sensor for detection of moisture on a cooling ceiling and for cooling ceiling control.
Product Description

Jola – KUR 5 for connection of a FTS/KO-1 film sensor for detection of moisture on a cooling ceiling and for cooling ceiling control

Conductive relay for U-bar or surface mounting, with connection terminals on top of housing and red LED for moisture signalling. Conductive relay for U-bar or surface mounting, with connection terminals on top of housing and red LED for moisture signalling. The unit is designed for switch cabinet mounting or installation in a suitable protective housing and may therefore only be mounted/installed in these locations. It is suitable for use in clean environments only.

The KUR 5 cooling ceiling controller is designed to measure the moisture between the printed conductors of a FTS/KO-1 film sensor and to switch the built-in output relay when a set sensitivity level is reached, thus permitting activation of an external solenoid valve.
Request
Callback
Yes! I am interested

Jola-SSX and SI/SSX1/K Floating Switches

Jola-SSX and SI/SSX1/K Floating Switches
  • Jola-SSX and SI/SSX1/K Floating Switches
Ask For Price
Product Price :Get Latest Price

Product Details:

Frequency50/60Hz
Operating Temperature55 Degree C
TypeFloating Switches
Material/BodyPlastic

Gas Alarm Systems India(in association with Gas Alarm Systems Australia offer Jola-SSX and SI/SSX1/K Floating Switches

Product Description :
  • Jola – SSX and SI/SSX1/K Floating Switches
  • These floating switches are designed for mounting from the side or from the top.
  • To ensure a correct switching, the cable must be fixed at the required height using a stuffing gland.
Request
Callback
Yes! I am interested

Jola Float Switches

Jola Float Switches
  • Jola Float Switches
Ask For Price
Product Price :Get Latest Price

Product Details:

TypeFloat Switches
VoltageAC/DC 24
Usage/ApplicationIndustrial
Material/BodyMetal

Details:
  • Jola – SI SSP Float Switches
  • These floating switches are designed for mounting from the side or from the top.
  • To ensure a correct switching, the cable must be fixed at the required height using a stuffing gland.
Request
Callback
Yes! I am interested

Float Switches

Float Switches
  • Float Switches
Ask For Price
Product Price :Get Latest Price

Product Details:

Temperature Range-40~125 Degree
TypeFlot Switches
Material/BodyStainless Steel

The rising or falling liquid level causes the float to move up or down respectively. When the float rises, it activates a micro switch (changeover contact).
Request
Callback
Yes! I am interested

Jola- Fuel Leak Detector

Jola- Fuel Leak Detector
  • Jola- Fuel Leak Detector
Ask For Price
Product Price :Get Latest Price

Product Details:

MaterialPlastic
Temperature20 Degree C+60 Degree C
TypeFuel Leak Detector
Measurement Range0-1000 litere

ALVI – India in association with Gas Alarm Systems – Australia offer Fuel Leak Detection.Industrial processes where fuel oil is used and stored, it is imperative to integrate an efficient fuel leak detection system to continuously protect distribution lines or storage tanks from leakage.

Most of the storage facilities in process industries, where spills are common, use bund as a part of spill containment system. Bund is a constructed retaining wall around storage providing a barrier to an unintended escape of material until remedial action is taken. It is best to detect the leak within the bund when the leak size is small avoiding further damage and expensive clean-up costs.

Bunding is widely used in fuel oil storage. Fuel oil such as petrol, diesel, kerosene, etc being non-conductive in nature , to detect and sense the presence of leak is a special challenge.

ALVI Technologies presents Fuel Leak Detection sensor JOLA OWE2/C that is designed to signal the presence of a non-conductive medium .

For an effective and early fuel leak detection, positioning and selecting the sensors at a right measurement point is quite essential. Jola OWE2/C detectors are placed under the tanks or pipes on the bund floor. It can sense and detect the presence of a liquid layer of about 2 to 3 ml! Alarm activation is required to trigger further corrective action. JOLA OWE2/C must be used with Jola Leckmaster 101 switching relay module. The various operating status on the switching module are shown by coloured LEDs.

Thus an early detection of spill/leakage can trigger timely countermeasures avoiding any further damage.

For further information, please visit Jola Leakage sensors or send us an e-mail
Request
Callback
Yes! I am interested

Non-Conductive Liquid Leak Detection

Non-Conductive Liquid Leak Detection
  • Non-Conductive Liquid Leak Detection
Ask For Price
Product Price :Get Latest Price

Product Details:

UsageWater leaking, Water leak detection
TypeLiquid Leak Detection
Temperature20 Degree C~80 Degree C

Non-Conductive Liquid Leak Detection for fluids such as petrol, diesel, kerosene etc. is often required in many industrial and environmental applications. Being non-conductive in nature, to sense and detect the presence of leak is a special challenge. ALVI proudly presents Jola OWE2/C that can be used in variety of Non-Conductive Liquid Leak Detection applications and at the same time can minimize health, safety and environmental risks.

Jola OWE2/C is designed to signal the presence of non-conductive medium, caused for example, by burst pipes.

Most of the storage facilities in process industries, where spills are common, use bund as a part of spill containment system. Bund is a constructed retaining wall around storage providing a barrier to an unintended escape of material until remedial action is taken. For an effective and early detection, selecting a right sensor and positioning it at a right measurement point is quite important. Jola OWE2/C detectors are placed under the tanks or pipes or on the bund floor. It can sense and detect the layer of about 2 to 3 ml!! An alarm activation is required to trigger further corrective action. Jola OWE2/C must be used with Jola Leckmaster 101 switching relay module. The varios operating status on the switching module are shown by coloured LEDs. Thus an early detection of the spill/leakage can trigger timely countermeasures avoiding any further damage
Request
Callback
Yes! I am interested
X

Explore more products



Reach Us
Alak Jha (Director)
Plot No. 350, Ram Gali No. 8, Jagatpura
Kusum Vihar, Jaipur- 302017, Rajasthan, India



Call Us

Share Us

F GT L


Send E-mailSend SMS