Call 08048989985 90% Response Rate

Send Email

New Items

Refrigerant R22 Gas Sensor Transmitter

Refrigerant R22 Gas Sensor Transmitter

Get Latest Price

Product Brochure

μGard®2 R123 Freon and Refrigerants Gas Transmitter MC2-X-S2064-01-A -X-X GasAlarm

μGard®2 (developed by MSR) is the new exchangeable sensor unit that is capable of digital value processing, temperature compensation, and self-control for the continuous monitoring of the ambient air to detect R123 refrigerant gas.

The MC2-X-S2064-01-A -X-X is a sensor element at its core with many possible customizations. The beauty of the microgard 2 system is a microcontroller integrated into the Semi-Conductor R123 sensor module. The integrated temperature compensation ensures the highest accuracy, selectivity and reliability despite the long calibration interval. The microcontroller calculates a linear 4-20 mA (or 2-10V) signal out of the measurement signal of the Semi-Conductor sensor and also stores all relevant measured values and data of the sensor element.

Calibration is a breeze with this modular design allowing easy swapping of the sensor unit or via the use of the integrated calibration routine directly at the system.

FEATURES

  • Digital measurement value processing incl. temperature compensation
  • Data / Measured values stored in the microcontroller on the sensor unit allowing easy swap of an old sensor with a newly calibrated sensor.
  • High accuracy, selectivity, and reliability
  • Low zero point drift
  • Sensor lifetime: > 5 years / normal environment
  • SIL2 Compliant development process
  • Easy maintenance and calibration by the exchange of the sensor module or by integrated on-site calibration.
  • 4-20 mA (or 2-10V) analog output with selectable signal output for special mode, fault, etc.
  • Reverse polarity protected, overload and short-circuit proof
  • Integrated heating down to -35°C
  • Plug and play type concept for field calibration, laboratory calibration and site calibration (where the housing of the gas sensor remains on to the wall with cable wiring and later sensor cell transmitter cartridge can be plugin after calibration)
  • Smart digital type calibration facility with an indication of the life of the sensor cell.
  • Simplified maintenance via the exchange of pre-calibrated sensor cartridges or easy on site-calibration.
  • Tough, rugged, glass-fibre reinforced, Impact resistant, fully gasketed
    Polycarbonate IP 65 enclosure.
  • IP65 protected housing, with the provision of dust and moisture protection with
    Hydrophobic filter arrangement.
  • Monitoring of R123 can be achieved with our optional MSR centralized Gas control and monitoring system to meet the global ventilation standards like:

o EN 378
o EN 14624
o EN 45544-1
o EN 61508-1-3
o EN 61010-1
o ANSI/UL 61010 1
o CAN/CSA-C22.2 No. 61010-1

  • Optional:
    • Without housing
    • With housing Plastic: Type D, 94 x 65 x 57 mm
    • 4-20 mA output signal
    • 2-10 V output signal
    • With display for values and operation, 2x open collector for horn and warning lamp

Built for standard output of 4-20 mA / 2-10V analog signal output, this transmitter is compatible with the PolyGard 2 series controllers & Sensor Boards as well as any other electronic control or automation system.

Should you have any questions or concerns regarding this matter, please feel free to contact us or reach our experts to info

Get Best QuoteRequest A Callback
MSR Germany Refrigerant R23 Gas Detector
  • MSR Germany Refrigerant R23 Gas Detector
  • MSR Germany Refrigerant R23 Gas Detector

MSR Germany Refrigerant R23 Gas Detector

Product Price: Rs 50,000 / PieceGet Best Price

Product Brochure

μGard®2 R23  Freon and Refrigerants Gas Transmitter MC2-X-S2061-01-A-X-X GasAlarm

μGard®2 (developed by MSR) is the new exchangeable sensor unit that is capable of digital value processing, temperature compensation, and self-control for the continuous monitoring of the ambient air to detect R23 refrigerant gas.

The MC2-X-S2061-01-A-X-X is a sensor element at its core with many possible customizations. The beauty of the microgard 2 system is a microcontroller integrated into the Semi-Conductor R23 sensor module. The integrated temperature compensation ensures the highest accuracy, selectivity and reliability despite the long calibration interval. The microcontroller calculates a linear 4-20 mA (or 2-10V) signal out of the measurement signal of the Semi-Conductor sensor and also stores all relevant measured values and data of the sensor element.

Calibration is a breeze with this modular design allowing easy swapping of the sensor unit or via the use of the integrated calibration routine directly at the system.

FEATURES

  • Digital measurement value processing incl. temperature compensation
  • Data / Measured values stored in the microcontroller on the sensor unit allowing easy swap of an old sensor with a newly calibrated sensor.
  • High accuracy, selectivity, and reliability
  • Low zero point drift
  • Sensor lifetime: > 5 years / normal environment
  • SIL2 Compliant development process
  • Easy maintenance and calibration by the exchange of the sensor module or by integrated on-site calibration.
  • 4-20 mA (or 2-10V) analog output with selectable signal output for special mode, fault, etc.
  • Reverse polarity protected, overload and short-circuit proof
  • Integrated heating down to -35°C
  • Plug and play type concept for field calibration, laboratory calibration and site calibration (where the housing of the gas sensor remains on to the wall with cable wiring and later sensor cell transmitter cartridge can be plugin after calibration)
  • Smart digital type calibration facility with an indication of the life of the sensor cell.
  • Simplified maintenance via the exchange of pre-calibrated sensor cartridges or easy on site-calibration.
  • Tough, rugged, glass-fibre reinforced, Impact resistant, fully gasketed
    Polycarbonate IP 65 enclosure.
  • IP65 protected housing, with the provision of dust and moisture protection with
    Hydrophobic filter arrangement.
  • Monitoring of R1234yf can be achieved with our optional MSR centralized Gas control and monitoring system to meet the global ventilation standards like:

o EN 378
o EN 14624
o EN 45544-1
o EN 61508-1-3
o EN 61010-1
o ANSI/UL 61010 1
o CAN/CSA-C22.2 No. 61010-1

  • Optional:
    • Without housing
    • With housing Plastic: Type D, 94 x 65 x 57 mm
    • 4-20 mA output signal
    • 2-10 V output signal
    • With display for values and operation, 2x open collector for horn and warning lamp

Built for standard output of 4-20 mA / 2-10V analog signal output, this transmitter is compatible with the PolyGard 2 series controllers & Sensor Boards as well as any other electronic control or automation system.

Should you have any questions or concerns regarding this matter, please feel free to contact us or reach our experts to info

Be sure, Be safe – Gas Detectors and Alarm Systems

Get Best QuoteRequest A Callback

EXPLORE MORE CATEGORIES

Looking For "New Items"?
Thank youYour Enquiry has been sent successfully.

Reviews & Rating

4/5

★★★★★★★★★★

Reviewed by 24 Users

  • 5★46%
  • 4★25%
  • 3★8%
  • 2★0%
  • 1★21%
  • User Satisfaction
  • Response80%
  • Quality     100%
  • Delivery   66%

Most Relevant Reviews

V
★★★★★★★★★★
06-October-21
VK Goyal
Chandigarh, Chandigarh
Response
Quality
Delivery
P
★★★★★★★★★★
01-September-21
Paras Turkewadkar
Khed, Maharashtra
Product Name : Leak Detectors
Response
Quality
Delivery
D
★★★★★★★★★★
27-June-20
Dedi Simanjuntak
Indonesia
Product Name : Gas Transmitter
Quick response and now proposal to customer

Response from Seller

Thanks


© ALVI Automation India Private Limited. All Rights Reserved (Terms of Use)Developed and managed by IndiaMART InterMESH Ltd.